Sign In | Join Free | My burrillandco.com
Home >

1000L PID Constant Climate Temperature Humidity Test Chamber

  • Product Details
  • Company Profile

1000L PID Constant Climate Temperature Humidity Test Chamber

Specifications:
ModeHST-280-2150-22252408-2800
Inner Size
W×H×D(cm)
40×50×4050×60×5060×85×8060×85×80100×100×80
Outside Size
W×H×D(cm)
93×155×95100×148×106117×166×91140×176×101170×186×111
Volume (V)80 L150L225L408L800L
Temp and Hum RangeA:-20°C~150°C B: -40°C~150°C C: -60°C~150°C D: -70°C~150°C
RH20%-98%
FunctionFluctuation0.5°C ±2.5%RH
Deviation0.5°C-±2°C ±3%RH(>75%RH); ±5%RH(≤75%RH)
Controller
Analytical
Accuracy
0.3°C ±2.5%RH
MaterialInner Wall#SUS 304 Stainless steel
Outer Skin#SUS 304 Stainless steel
Heat PreservationHigh temperature resistant,
high chlorine acid b vinegar foam insulation materials
Wind Cycling WayCentrifugal fan-broadband type forced air circulation
Refrigeration WaySingle stage compression refrigeration
RefrigeraterFrench Tecumseh
RefrigerantsR4O4A USA Dupont environmental protection refrigerant(R23+R404)
Condensing WayAir-cooled or water-cooled
HeaterNickel chrome heating wire heater
HumidifierSemi-closed steam and wet
Water Suplying WayAutomatic cycling water supply
Standard Accessories1 Observe window(double-deck cavity toughened glass),
1 50mm test hole in the left,
1 PL inner chamber lamp,
2 clapboards,
1 bag of wet and dry bulb,
3 fuses,
1 power line.
Safety deviceNon- fuse-switch(compressor overload,
refrigerant high low voltage,
over-humidity and temperature protection,
Protection switch,fuse stoppage warning system

1. All Walk-in Room Systems
a. Operate continuously in cooling mode.
b. Provide a hot gas by-pass system to automate capacity reduction when the room is at the set point temperature.
c. Are constructed with high quality components including: liquid line solenoids, liquid sight glass, dryers, strainers, and TX valves.
d. Contain Bock semihermetic (or equal ) compressors.
e. Contain LED Touchscreen (or equal) controls.
f. Comply with ASHRAE guidelines for piping and rating.
g. Are factory-assembled and tested.
h. Are simple to maintain because components are easily accessible and clearly labeled.
Up to 5 HP units can be mounted on the roof of the walk-in room. Larger units are installed on the floor next to the room.
Comprehensive piping diagrams, schematics, and charging data are available for our environmental walk-in rooms.
2. Design Standard
GB/T2423/5170/10586, JIS C60068, ASTM D4714, CNS3625/12565/12566
Quality 1000L PID Constant Climate Temperature Humidity Test Chamber for sale
Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Wuxi HST Test Equipment Co.,Ltd.
*Subject:
*Message:
Characters Remaining: (0/3000)
 

Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们

Copyright © 2009 - 2020 burrillandco.com. All rights reserved.