This package only includes the quadcopter body (without receiver)
and it does NOT include a transmitter, if you want a ready to fly
version, please order it HERE.
Enter the correct coupon code to get the biggest bargain!
Walkera has developed their first multi-rotor with GPS module --
the QR-X350. The beautiful white body looks very similar to the DJI
Phantom but it's from the Walkera Factory. It is not a very big
quad, but it flies stably like bigger ones. So that is another
assembled GPS Quadcopter set to choose from!
Function Introduction Video:Please note that the camera mount and the camera are not included
in the package.
Unboxing (Devo F7 Set)
The soul of the QR X350 is the GPS module, and realize hover
function once the model takes off. The module also allows the quad
to make a relative hover and lock the correct altitude. Which means
you can fly to certain height, lock it, then the quad always fly at
the same height.
With the GPS technology, the multi-rotor can go to the home point
by pressing just one key on the transmitter. This function also
enables the quad to "Go home" when it loses connection with the
controller! (But make sure that the quad have enough battery to fly
To let the quadcopter fly smoothly with GPS works in good
condition, you need to calibrate the quad before flying. For the
calibrating method, please see the video below.
The Walkera QR X350, like usual quads, allows to install camera
mounts for flight video taking. You can order a camera mount for
the GoPro camera from it's spare parts list. That fits and holds
the GoPro perfectly for stable video taking. That also thanks to
the quad's stable flight. The original Walkera QR X350 spare parts
list also got a camera mount for the Walkera DV04 camera, check it
out if you need one.
- Main Rotor Diameter: 556mm
- Main Rotor Blade Length: 206mm
- Main Motor Size: WK-WS-28-008A
- Battery: 11.1V 2200mAh 25C LiPo
- Length: 289mm
- Width: 289mm
- Height: 180mm
- Approx. Flight Time: 10-15 min.
- Number of Channels: 5 CH+
- Rotor Type: Quad-copter
- Motor: 4 x Brushless Motor
- ESC: 15A Brushless ESC x 4
|Standard (w/ Devo7/Devo8S TX)||FPV Version (w/ Devo F7 TX)||Body Only (w/o TX)||Body Only (w/o Both RX/TX)|
|Main Board Control|
|Transmitter||Devo7 or Devo8S Transmitter||Devo F7 FPV Transmitter|
|FPV Module (TX5803)|
|Camera (Walkera DV04)|
|FP Transfer Wire|
|Camera Mount (DV04)|