1x to 16x pcie riser cable with molex power
Powered PCI-E risers cables are essential when building a Bitcoin
or Litecoin mining rig so your motherboard does
not get burnt out. Used by Bitcoin and Litecoin miners to rise the
important graphics cards from their motherboard
and space them out better for cooling and to enable more GPUs to be
It also allows you to connect your graphics card to any 1x, 2x, 4x,
8x and 16x PCI-E slots to make use of those slots
you wouldn't normally be able to use. By connecting your graphics
card to the riser then to the power supply via a
molex connector, you take the strain off the motherboard and
prolong its life.
Get your essential riser cables ASAP to start making the most of
your Bitcoin or Litecoin mining rig
16x to 16x pcie riser cable with molex power
2-layer PCB bard designing PCI-E 16X slot soldered with normal IDE
No Driver necessary and not support hot swappable.
cable length: 15cms, total length: 19cms
molex cable provide extra power suppy if your pci-e video card
can't get enough power from PCI-e slot.
Powered PCI-Express PCI-E Riser 1x to 16x Flex USB Extender Sata
and Molex 3feet
A MUST HAVE FOR ALL CRYOTOCURRENCY (BITCOIN & LITECOIN ETC)
Powered PCI-E riser cables are used by cryotocurrency (Bitcoin
& Litecoin etc) miners to raise their graphics cards
awayfrom their motherboard allowing space to cool.
Also very useful for when the case does not allow sufficient amount
of room between graphics cards. Powered riser
cables are an abolute must when running multiple GPU's to mitigate
the risk of drawing to much current direct from
your motherboard and burning it out.
Dual PSU ATX 24 Pin Cable for Litecoin and Bitcoin Mining rigs
1.Enables the connection of two power supply units to a single
2.Perfect for Litecoin and Bitcoin Mining rigs and Dual PSU gaming.
3.With this simple adapter you can join the power of 2 PSUs into