1. Should be poured the adhensive rapidly.
2. After pouring the glue ,Colloidal will spread fast , and the probability of emery cloth fall down is low.
3. High resin solid content , solidifying material has high bonding, high heat resistance and
Coated 170°C solity 2h
Shearing strength in normal temperature ( mpa)
200°C Shearing strength (mpa)
Data of rewind in normal temperature
Method of use
1. Before use the Synthetic Resin Adhesive need preheated in ( 50-60 ) °C for 60min, after installed on the machine the Synthetic Resin Adhesive temperature is 45-50°C.
2. After assemble the flap disc should be put into the oven with the temperature up to 130°C and heat preservation for 2h-3h .
Colloidal packing 280kg per barrel, or can also be based on customers demand
using non-standard packaging.
Colloid belongs to low toxic chemicals, should avoid entering eyes, oral.
Storage and packaging
1. Below 25°C storage, relative temperature under the condition of <70%, 6 months
shelf-life, over shelf life after composite lattice can continue to
2. This product is not dangerous goods, according to the transport of chemicals in
The above performance data for the product to a temperature of 70%,
temperature 25°Ctest of typical data, only to provide customers with the reference, and
can not be fully guaranteed in a specific environment can achieve
all the requirements, please customers use, based on the measured
Single Epoxy Resin ; one-component epoxy adhesive