1.The machine tools are the mature products designed by referring
to the advanced technologies globally. The machine tools adopt the
structure of flat bed and slant saddleintegral body and foot ,
which are made by Resin sand casting . fully-protective all-in-one
layout of 30° inclined sliding plate make the transverse feeding
movement on the saddle guideway , the feed speed of the
longitudinal and transverse direction can be as high as 30m/min .
The structure of flat bed and slant saddle to reduce the
installation of the gear box , tailstock and saddle , which
improves the rigidity of the whole machine
2.Lathe bed is designed by two areas :chip collecting and
watershed, which can well focuses coolant flow to the tank, to
avoid the leakage
3.The numerical control system is FANUC 0i- Mate-TD plus servo
drive and the servo spindle .the machine tools can accomplish the
processing of linear, arc and metric system and English system
threads and are suitable for the processing of the discs and axles
that have complicated cutting shapes and require high precision.
4.The spindle box and lathe bed have reliable positioning, and
firm, with good rigidity, vibration resistance, thermal resistance
and convenient maintenance and adjustment .Principal axle bearing
set by Japan NSK and the principal axle with precise assembly and
undergoing dynamic balance test are adopted, ensuring the high
precision, low noise and strong rigidity of the principal axle and
able to realize stepless speed regulation an constant speed
cutting, quick start and stop.
5.Both of the X and Z axis ballscrew are from Taiwan and bearing
from JAPAN NSK./NTN, Ball screw and motor through coupling the
directly connected, single-ended positioning pre-stretching type,
lathe bed guide rail and sliding saddle guideway adopt high
precision rolling guide, contact stress, rigidity, machining
accuracy retaining ability is good.
6.Horizontal screw fixed end design on the front end, make machine
not increase the cutting depth when ballscrew is heated and stretch
, avoid to cause the workpiece scrapped. Screw pre-stretching
structure was designed, and also to improve the lead screw bearing
7.The tailstock with built-in hydraulic sleeve structure, compact
and reliable. With Morse 4 center , pressure is adjustable.
8.The tailstock with built-in hydraulic sleeve structure, compact
and reliable. Configuration Morse 4 top, top pressure is
9.The machine tools adopt the hydraulic 8-station rotary turret by
Taiwan , which can rotate clockwise and anti-clockwise, have tool
change of the shortest path quickly, excellent positioning rigidity
and high repeated positioning precision.
10.The hydraulic chuck (210mm) with 8 standard through hole and
through hole reversing oil tank (including cut-off valve) by Taiwan
AUTO STRONG are adopted; pedal switch can be used to control the
tightening and release of work pieces.