Sign In | Join Free | My
Home > Other Welding & Soldering Supplies >

YN-1200 (30-156*156mm series welding)

  • Product Details
  • Company Profile

YN-1200 (30-156*156mm series welding)

YN-1200 (30-156*156mm series welding)

1. An overview of the
YN - 1200 model is the YN - 600 equipment upgrade, the efficiency is twice the YN - 600. Equipment structure and movement basic remain unchanged, but the operation is more stable, all the upgrade of software and hardware, and create greater economic benefits for our customers.
3. The basic specifications
1. Overall dimensions: length width of 4170 mm x 4170 mm x 1700 mm. (except for the height of the warning light)
2. Weight: 1500 Kg.
3. The power supply requirements: three phase 380 v, 50 hz, 30 a. Need to connect the neutral line and reliable grounding.
4. Air pressure: 0.5 MPa above clean dry air, the average consumption is less than 300 litres/minute, vacuum system adopts vacuum generator and fan.
5. Using the environment: 15 ~ 30 ℃, humidity is less than 90%.
6. Operation speed: the highest 3.6 seconds/piece.
7. Fragment rate: 3 ‰, or less (for cell without secondary sorting, for authentic porn).
8. After welding cell thief: + / - 0.3 mm or less.
9. The distance between the cell: 2 ~ 20 mm + / - 0.1 mm, can be adjusted according to requirements.
10. Each string of cell number, length: about 156 whole cell, maximum cell number per bunch of 12 slices. Slice for batteries, the minimum width not less than 30 mm. The longest of all the battery string length less than 1900 mm.
4. Product applicability
1. The cell: suitable for gate 3 and 4 gate, 5 bar (optional); 30 ~ 156 mm x 156 mm of monocrystalline silicon. Polysilicon batteries. Battery slice thickness for not less than 180 microns
2. The welding zone: material: tin plated copper belt. Width 1.6 ~ 2.0 mm, thickness 0.12 ~ 0.23 mm. Axis of reel packaging, 16 mm in diameter, 1 ~ 5 kg/roll.
3. The flux: low solid residue no clean flux.
5. All parts in detail
5.1 cell feed wheel
1. The cell feed wheel mechanism is made up of material box, protractor and jack-up motor of three parts;
2. The material box of a total of four, installed on the protractor, uniform set rotating protractor in circumferential direction;
3. The protractor can be 90 degrees of rotation will bin, based on the needs from the corresponding box material;
4. The box at the bottom of the jack-up motor can be material box cell on the top of rise and fall, to facilitate cell loot and separation.
5.2 cell transmission mechanism
1. The cell transmission mechanism by, take material cylinder, feeding shaft calibration platform, the feed cylinder four parts;
2. The feed shaft used to drive the feeding and feeding cylinder, cylinder is cell move;
3. Taking cylinder are taken from the feed box cell and place it in position calibration platform;
4. Calibration platform of x-y cylinder for battery position correction, make all battery position is consistent;
5. Put a piece of cylinder from position calibration platform cell will be removed and placed in welding platform.
5.3 welding supply mechanism
1. The welding zone supply department by supply motor, welding and welding with sensor, with plastic welding equipment, welding bending apparatus with clamp device, welding, welding and parts such as shear apparatus;
2. The welding zone supply motor according to welding with sensor signal, automatic rotation, in order to supply welding zone, until a welding with welding with sensor feedback signal in place of so far;
3. The welding with induction sensor for welding with supply motor signal, makes the motor start or stop;
4. Welding with plastic device is used in the welding process with tensile plastic welding with medium pressure tight, so do not move;
5. With clamp device is used for welding in the welding with fixed welding after the completion of the shear band, make it not shrink back;
6. Welding with bending device is used to weld with folding a tiny "Z" shaped bend, better able to make the welding and the overlapping cells before and after;
7. Welding with shear device is used to weld with shearing.
5.4 flux feed mechanism
1. The flux feed mechanism by flux supply container, dip tank welding zone, and flux pump of three parts;
2. The flux supply container is on the market to buy the flux barrels, can use directly into the machine;
3. The welding with flux dip tank make welding belt in the process of moving forward, there was a soak in flux, make weld surface from some flux, and welding;
4. The flux pump is used to transfer flux transferred from the flux supply container to welding with dip tank, can be automatically controlled.
5.5 welding pull with institutions
1. The welding belt pull mechanism is made by welding with grip, grip rotating mechanism, welding belt pull out parts such as shaft;
2. The welding wi
Product Tags:

welding equipment


power supply

Quality YN-1200 (30-156*156mm series welding) for sale
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    Send your message to this supplier
    Your email address is incorrect!
    Your subject must be between 10-255 characters!
    For the best results, we recommend including the following details:
    • --Self introduction
    • --Required specifications
    • --Inquire about price/MOQ
    Your message must be between 20-3,000
    Yes! I would like your verified suppliers matching service!
    Send your message to this supplier
    To: Shenzhen yeniu automation equipment co., LTD
    Characters Remaining: (0/3000)
    Find Similar Products By Category:
    Inquiry Cart 0

    Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们

    Copyright © 2009 - 2020 All rights reserved.