Technical data of terminal crimping machine high pressure hose
1.Crimper range: 1/8''~2" 4sp
2.Standard voltage&motor: 380V/4KW
3.Opening without dies: 122mm
5.Swaging force: 5300KN
6.Optional voltage&motor: 220V/2.2KW
7.No.of standard die: 10 sets
8.Systematic pressure: 31.5Mpa
Advantages of hydraulic hose fitting swager ferrule crimping
1.With cartridge vale, the machine is steady and reliable.
2.There is the lubrication and dustproof system.
3.Two option of control system: the normal one and the computer.
4.Quick change tool.
Now ,the steps to use our high pressure rubber hose crimper
1. highpressure rubber hose crimper machine first-time users should be
unloaded when crimping 20-30 ,observing all parts properly before
------2.Thehigh pressure rubber hose crimper machine should be used during the
winter to be empty withhold 20-30 in order to increase the oil
3.Pressthe open button, die after opening ,depending on the crimping hose
specification choose die appropriate stencil is install on seat
,and adjust the micrometer scale.
------4.Theconnector hose under pressure well in the proper position in the
nose,making a withholding of full length.
5.Withholdingbutton is pressed to withhold action until pressure pipe until stop
withholding automatically open stencils in the nose.
------6.Removewithhold good hose assembly ,after withholding using Vernier
caliper fitting jacket diameter dimensions ,such as conformity with
the parameters should fine-tune the micrometer scale ,till a rubber
tube under custody to meet the requirements.
About the steps to use high pressure rubber hose crimper machine,we
can supply the video ,if you want to take a look at these steps ,