Factory Environmental Test Machine Spray Flow Mixed Gas Corrosion
|Humidity Range||50%--95% R.H.|
|Test Time||0—999H,M,S Adjustable|
|Gas Concentration- VL||5ppb~250ppb|
|Gas generation method||cylinder method|
|Concentration Measurement||Use imported gas collector and gas tube test paper|
|Gas Control||The volume ratio is calculated and the mass flow meter is used to
control the flow rate according to different requirement|
|Volume replacement||3~10 times|
|Working Environment/Humidity||5℃~35℃; ≤85%;|
|Standard||IEC68-2-60; EN60068-2-60-1996; GB2423.19-81; GBT2423.51-2012|
The shell is made of SUS316 stainless steel sheet; The structure is
compact and the appearance is bright and lustrous. The inner and
most components are welded by SUS316 stainless steel plate.
Foot and Support
4 sets of four angle mobile positioning casters
Double door structure, inner box door adopts tempered glass.
Corrosion resistant silicone rubber seal.
7 inch color touch-screen control
Air Inlet Control
PLC controls the flow.
1.The equipment is designed with two boxes. The temperature and
humidity inside are made by external air conditioning cabinet.
2.A built-in air system: refrigeration system, heating and humidity
system. The system make qualified temp and humidity and inlet mixed
gas into teeter chamber, then send to test chamber after
3.The exhaust filtration system (Acid-base neutralizing chamber;
Vapor filter chamber and Adsorption chamber) is proven that
effectively filter acid gas.
4.To achieve uniform diffusion of inner chamber, the air enters to
the bottom firstly then passes through deflector.
5.The exhaust port of the equipment is connected with the outside,
so there is no need to be careful about the accumulation of
residual gas in the laboratory.
6.The inlet port of the corrosive gas is Φ3mm.
1.Temperature and humidity controller adopts 7 inch "fiber" large
screen - color LCD programmable microcomputer, PID control, SSR
output operation. The operation simple: easy to edit the program;
interface can simultaneously display the temperature and humidity,
hydrogen sulfide, dioxide, nitrogen dioxide, sulfur dioxide,
nitrogen dioxide, Flow value of chlorine gas.
2.Accuracy: 0.1 ℃ (display range), resolution: ± 0.1 ℃
3.Temp sensor: PT100 platinum resistance thermometer
4.Control mode: heat balance temperature regulation and humidity
control, all electrical appliances adopt (Schneider) series
5.With the function of automatic calculation, the temperature and
humidity change conditions can be immediately corrected.
6.The language is English and Chinese optional. The real-time
running curve can be displayed on the screen with 100 sets of 100
segments, each section can be circulate 999 steps. The maximum
value of each period is 99 hours and 59 points.
7.With RS-232 or RS-485 remote communication interface, it can
design programs on the computer, monitor the test process and
perform automatic switchboard functions.
8.The controller has the function of automatic screen saver, which
can protect LCD screen better in long time running state.
9.Equipped with LAN port, the device can be connected to the
computer to monitor and control the temperature and humidity status
of the equipment in real time.
10. H2S, SO2, NO2, CL2, 4 kinds of low consistency gas flow meters.
11.Configuration of exhaust emission system: residual gas
discharged to outside through special treatment.
12.Configure the gas leak alarm device.
13.Equipped with various gas pressure relief valves.
14.Imported electromagnetic valves and air oil-water separators.
15. All kinds of anti-corrosive electromagnetic valves;
16. executive components: Schneider AC contactor, small relay,
solid state relay.
Refrigeration and Dehumidification System
1.Compressor: French Tecumseh. Ir can keep the temperature 25 ℃ and
humidity 75% in summer.
2.Cooling method: Air cold.
4.The whole pipeline is ventilated and pressurized by 48H.
5.Separated heat and cooling system.
6.Internal spiral copper tube, slope evaporator;
7.Dry filter, refrigerant flow window, repair valve, oil separator,
solenoid valve and liquid storage tank are imported original parts.
The machine is equipped with overheated protection, underphase /
reverse phase protection, refrigeration system overload,
over-pressure of the refrigeration unit, the timing of the whole
equipment, the other leakage, the operation instructions, and the
automatic shutdown after the fault alarm.
OTS Instrument Co., Ltd.
was established in 1978, with over 35 years’ history, is one of the
leading companies solely dedicated to manufacture of
environment,class,mechanics,package testing equipment...
(such as constant temperature and humidity chambers, environmental
chambers, thermal shock test
chambers,fast change rate chambers, yellowing resistance aging test
chamber, salt spray chamber,
tensile testing machine, universal testing machine,carton
compression testing machines, bursting
strength testing machine, vibration test, etc.) ...
OTS has the equipment and expertise, with own R&D and
consultant team, to meet and exceed your testing
requirement. with offices in unrivaled quality advantage, dynamic
management team with superb manufacturing
process,also the quality with the world norms: ISO , ASTM, DIN, EN,
GB, BS, JIS, ANSI, UL,CE, TAPPI,
AATCC, IEC, VDE...
1. Do you offer after-sales service? How can I ask for that? And
how about the warranty?
98% RH Humidity and Temperature Climate Tester from our factory has
a 14-month warranty after shipment. Generally,
we offer 12 months for the FREE maintenance, while considering of
we can extend 2 months for our customers.
If your machine doesn’t work, you can send E-mail to us and we will
try our best to find
the problem by email or skype video chat if neccesary. After
confirmation of the problem,
we can send you new spare parts or provide on-site repair.
2. What’s the delivery term?
At most of time, we have stock in the factory. If there is no
stock, normally, the delivery
time is 15-20 working days after deposit receipt. If you are in
urgent need, we can consider
making a special arrangement for you.
3. Do you accept customization service? Can I have my logo on the
Yes, of course. We can not only offer standard machines, but also
machines according to your requirements. And we can also put your
logo on the machine.
4. Do you have a branch company or service office in my country?
We have offices in the belowing:
The US Office: XIN BAO INSTRUMENT (US) CO.,LTD
Vietnam: XIN BAO INSTRUMENT INDUSTRY(VIETNAM)CO.,LTD
Address:248 no.1A Road,An Lac-Binh Tri Dong Residence,B Ward, Binh
Tan Disrtict, HO Chi Minh City, Vietnam.
Singapore Dealer: Surveillance Inspection & Testing Services Pte Ltd
Tel: (+65) 96857857
Address:No. 5 Jalan Kilang Barat #08-06 Petro Centre Singapore,
Italy Dealer :AMSE SRL
Address: Strada della Cebrosa 86, 10156 Torino Italy
Taiwan : TAIWAN XIN BAO INSTRUMENT CO.,LTD
Address: No. 551-1, 4, Central Road, Taichung City, Taiwan