Corrugated Roofing Sheet Making Machine For Plastic Wave Roofing
PVC trapezoidal tile
Mainly used for herringbone roofing, roofing in the middle, with
ridge tile covering connection.If the need for roof insulation,
tile can be used after the continuous bedding.Then cover the tile
above the rolling, with self tapping screws into one, fixed in the
steel frame purlin above can be.Type 840 watt point, no leakage
when it rains.
PVC wave tile
It is the best material for the construction of arched building
greenhouses. It can be built on the long span roof without
deformation, and the construction is fast, safe and convenient.
When the construction is allowed, no longitudinal lap is required.
The production process
Polyvinyl chloride resin (referred to as PVC) as the main raw
materials, supplemented by UV anti-ultraviolet agents and other
chemical raw materials, after the scientific ratio, through high
temperature plasticization, thickness of the extrusion after
cooling and finalization.As PVC chemical raw materials themselves
have resistance to chemical corrosion, and then a variety of
chemical materials as an auxiliary raw material ratio to achieve
resistance to cold, ultraviolet radiation, resistance to aging.
|Installation power||Suggested 250KVA transformer|
|Cooling Water||≤20℃, ≥0.3Mpa, ～10 tons/hr|
|Compressed air||0.3m3/min, ＞0.6Mpa|
|Manpower||3 Persons/shift (24 hours need 2 shifts)|