Printed Passive Black ABS Rfid Key Fob for Access Control Systems
This is a sleek looking RFID key fob made from hard black plastic
with a metal ring. The tag contains a unique ID that can be read by
the RFID reader at a distance of 8cm or less.
NFC Ultralight EV1 ABS Keyfob tags are becoming increasingly
popular for Access Control, since these tags also provide the dual
function of being a ' Key Chain' for your own keys such as vehicle,
home, hotel,office, and other types.
|Tag Characteristics||Passive, Read-Only|
|Message Length||64 bit|
|Unique ID Length||40 bit|
|Typical Read Distance(with 1023 - PhidgetRFID)||80 mm|
NFC Ultralight EV1 ABS Keyfob Features:
Can be embedded with LF(Low Frequency 125KHz) chips:
TK4100,EM4200,EM4305,T5577,Hitag 1,Hitag 2,Hitag Series etc.
Can be embedded with HF(High frequency 13.56MHz) chips:
series,Ti2048,Desfire 2K(4K,8K),Plus 2K(4K) etc.
Can be embedded with UHF(Ultra High frequency 860MHz-960MHz) chips:
U-CODE GEN2,Alien H3(H4),Impinj M4(M5) etc.
Widely used in Access Control Areas, Identification, Door Keys,
Attendance, Parking Lots etc.
If you are interested in this key fob, please welcome to send us an