Coil Winding machine Spare Parts -Motor Nozzle
The product is made prcciscly of hard alloy and cnjoy the hardness
up to HRA90. Two terminals
and inner hole are all receive mirror surface treatment to ensure
cnameled wire makes no scrape.
Can be produced in accordance with customer requirements!
Eliminate wire insulation film damage, low friction resistance,
stable wire tension.
The wire-guiding surfaces are mirror finished by diamond lapping to
a surface roughness of
2 -4 micro inches Ra or better, material permit.
Superior and inferior quality of alloy wire nozzle:
1 Nozzle orifice finish:
At the junction of its location, hole and arc angle, by visual
method is unable to see, only with the
high magnification magnifier to observe the side, if there is an
obvious mark junction hole and
transition arc angle, then the result is brought about by it
scratch the enameled wire, if the quality
of the nozzle, at the junction of the inner hole and the arc angle
it is a natural excessive, no transfer
2 In the hole:
It is the quality of the product is also very crucial in the
process of product winding in the inner hole
of the enameled wire is in the mouth of the online beating state,
if the internal hole grinding processing
is not good, so the scraped line and then the inevitable worth to
remind is, now on the market a lot in
hole alloy wire mouth is without grinding precision or simple rough
3 Hole size precision:
Precision machining line mouth, its inner hole accuracy can be
controlled within 0.01mm, if the hole
size is greatly small, break phenomenon often occurs, even the
winding insulation failure or interturn
short circuit is not hard to explain why.
4 Installation size precision
According to the consistency of the packing size is necessary, if
it is hard to put into a small equipment fixture, it is easy to
fall out of fixture and influence adjustment precision.
5 head and tail shape:
R line shape is a key part of the R mouth of the head and tail, R
is too large or too small will influence
the quality of products and can withstand the tension.
Nozzle Drawings for example :
Above is just for example all size can be customized according to
customer’s special dimensins drawing requirements .
Picture show :
Why do you choose us?
In hardware tools, the wire winding machine training industry has
more than 10 years of experience,
we have more than and 100 skilled workers.
2. competitive price
One-stop service, from the material of die cutting process,
production, QC, packaging, delivery.
We are sure we produce all the goods. And the quality is 100% rest
assured. Many customers are
very happy to cooperate with us, because we can provide a more
competitive price as a factory.
3. The best choice of material
All of our goods are the best material from the best suppliers,
whether the material is qualified can
4. Quality Control
Before shipment, there are specialized personnel checks, each
product in the packaging before
the inspection is qualified. We guarantee that each product
shipment is perfect for sale.
5. Good service
We promise to answer your question in 24 hours.