Coupling Structure Polyurethane Foam Machine 2 PCS Transfer Pump
Hose
Spec:
| Specifications: 900 | |
| The ratio of raw material | 1:1 |
| Viscosity range of raw material | 200-1000CPS(under working temperature) |
| Max working pressure | 25Mpa (200bar) |
| Max fluid temperature | 80°C (176°F) |
| Max output | 2-10kg/min |
| Heater power | 5000W×2 |
| Drive model | Full pneumatic |
| Pipeline insulation heating power | 3500W |
| Voltage (Optional) | 1-ph 220V 50Hz or 3-ph 380V 50Hz |
| Pneumatic source | 0.5-0.8Mpa 1m³/min (73-116psi 35 cu ft) |
| Standard Configuration: | |
| A500 mainframe | 1 set |
| P2 spray gun | 1 pc |
| Transfer pump | 2 pcs |
| Heated hose (Standard) | 15m (50ft) |
| Max hose length (Optional) | 120m |
| Transfer pump hose | 2 pcs |
| Air pipe | 1 set |
| Spare parts and tools | 1 set |
| Transport Parameter: | |
| Package size (L×W×H) | 1000×900×1500cm (2.95×2.95×4.75ft) |
| Net weight/Gross weight | 125kg/200kg (286 lb/430 lb) |
Description:
1. The equipment has obtained CE certification, safe and
environmental protection.
2. Having the proprietary property rights in design and production,
several national patents have been applied and approved.
3. The perfect coaxial structure design of the horizontal booster
pump reduces greatly the abrasion of the sealing. There is no
pressure difference during operation and the commuting pressure
fluctuation value is ideal and stable.
4. The lubricant inside the anti-solidifying lubricating cylinder
circulates with high speed so that the leaked material and
impurities could be brought away rapidly. The shaft for black
material is always kept in the lubricant avoiding the
crystallization.
5. The delicate coupling structure is easy for the dismounting of
the booster pump during the maintenance. When necessary, the
complete unilateral raw material pump can be replaced to change the
proportion of the raw material.
6. The pneumatic commuting control assembly is simple in structure
and reliable in operation, and enables the pump body operating
normally during the lack of electricity.
7. The design and application of the reset function when shut down
realizes the dual protection.
8. The dual filters of the equipment for both high and low pressure
and the filter of the nozzle realize the triple filtration
protection for the raw material and reduce the blocking.
9. The special armoured temperature sensor inside the heater can
collect the temperature signal at any time, hence the overshooting
value for heating is well controlled.
Use area:
Building exterior wall, cold storage, automobile, chemical storage
tank, workshop workshop, grain depot, farm shed and so on.
Picture:
