Sign In | Join Free | My burrillandco.com
Home > Shafts >

6308 2RS Compressor Precision Ball Bearing 40mm P5 High Speed Reducer

    Buy cheap 6308 2RS Compressor Precision Ball Bearing 40mm P5 High Speed Reducer from wholesalers
     
    Buy cheap 6308 2RS Compressor Precision Ball Bearing 40mm P5 High Speed Reducer from wholesalers
    • Buy cheap 6308 2RS Compressor Precision Ball Bearing 40mm P5 High Speed Reducer from wholesalers
    • Buy cheap 6308 2RS Compressor Precision Ball Bearing 40mm P5 High Speed Reducer from wholesalers
    • Buy cheap 6308 2RS Compressor Precision Ball Bearing 40mm P5 High Speed Reducer from wholesalers
    • Buy cheap 6308 2RS Compressor Precision Ball Bearing 40mm P5 High Speed Reducer from wholesalers

    6308 2RS Compressor Precision Ball Bearing 40mm P5 High Speed Reducer

    Ask Lasest Price
    Brand Name : UIB
    Model Number : 6308 2RS
    Certification : ISO9001:2008
    Price : negotiable
    Payment Terms : L/C, D/A, D/P, T/T, Western Union, MoneyGram
    Supply Ability : 10000per month
    Delivery Time : as per order quantity
    • Product Details
    • Company Profile

    6308 2RS Compressor Precision Ball Bearing 40mm P5 High Speed Reducer

    6308 2RS Compressor Precision Ball Bearing 40mm P5 High Speed Reducer


    I. Product brief introduction:

    Motor bearing, also known as motor bearing or motor bearing, is a special bearing used for motor.

    The bearings used by the motor supporting the shaft, which can guide the rotation, and motor bearing can also bear the rotating parts of the shaft.


    YSJ series compressor special motor bearing type

    Shaft extension: 6204-2e-c3, 6205-2e-c3, 6206-2e-c3, 6308-2e-c3, 6309-2e-c3, 6311-c3, 6313-c3, 6314-c3, 6317-c3, 6319, 6319-c3, 6322
    Fan end: 6204-2e-c3, 6205-2e-c3, 6206-2e-c3, 6308-2e-c3, 6309-2e-c3, 6311-c3, 6312-c3, 6313-c3, 6314-c3, 6317-c3, 6319-c3 and 6322-c3


    II. Product advantage:

    Most of the small and medium motor USES rolling bearings. Large and medium sized motors also use rolling bearings. Small motor bearing at both ends.
    Ball bearing (deep groove ball bearing) is used. The medium motor USES roller bearings (usually used for high load conditions) on the load side, and ball bearings are not used in the load end (but there are also the opposite, such as 1050kW motor). The rolling bearing is lubricated by grease, but also lubricates the lubricating oil.


    Instrallation:

    Whether the bearing installation is good or bad will directly affect the bearing's accuracy, life and performance. Therefore, please fully study the installation of bearing, i.e., bearing installation according to operation standard including the following items.
    Cleaning bearings and related parts. (for grease lubricated bearings and double-sided oil seal or dust cover, no cleaning shall be required before the sealing ring bearing is installed.)
    To check the dimensions and finishing conditions of relevant parts


    Installation method


    Bearing should be installed according to the bearing structure, size and cooperate with properties of bearing parts, pressure should be directly in the tight fit on the ring width, shall not be passed on roller pressure, bearing installation commonly adopt the following methods:


    A. Pressure fit
    Bearing inner ring and shaft tight fit, outer ring and bearing hole is a loose fit, press the bearing to be pressed on the shaft are available, and then put the shaft together with the bearing load bearing hole, when pressed on the bearing inner ring end face, cushion the assembling casing made of a soft metal material (copper or mild steel).
    When the bearing outer ring and the bearing hole are tight fit together, the inner ring and shaft are relatively loose, and the bearing can be pressed into the bearing hole. The outer diameter of the assembly casing should be slightly less than the diameter of the hole.
    If the bearing ring and the shaft and the seat hole are tight fit, the mounting of the inner circle and the outer ring should be pressed into the shaft and the seat hole. The structure of the assembly sleeve should be able to hold the inner circle and the end surface of the outer ring simultaneously.


    B. heating
    By heating the bearing or bearing seat, the thermal expansion will be used to fit the installation method of loose fitting. Is a common and labor-saving installation method. This method is suitable for interference quantity larger the installation of the bearings, the bearing before hot charging type or separable bearing ring into the fuel tank even heat 80-100 ℃, and then loaded on the shaft, as soon as possible out of the oil to prevent inner ring after cooling end face and the shoulder joint is not tight, bearing axial fastening again after cooling. When the bearing outer ring is tightly coupled with the light metal bearing seat, the hot loading method of the heating bearing seat can be used to avoid the surface chafing.
    Heating tank with bearing and should be at a certain distance from the bottom of a mesh, or hanging hooks in the bearings, bearing on the bottom, in case of heavy impurities into the bearing or uneven heating, fuel tank must have a thermometer, strictly control the oil temperature shall not exceed 100 ℃, in order to prevent the tempering effect, reduce the hardness of the ring.


    compressor bearing 6308 2RS Product specification:


    bearing typeISO bearing NO.OLD bearing NO.IDODWIDTHCrCorgrease lubricatedx
    speed
    oil lubricated
    speed
    weight
    compressor bearing6308-ZZ-4090230.636
    compressor bearing6308-2RS1803084090230.636
    compressor bearing6308-N-4090230.627
    compressor bearing3308A3256308409036.562.745.4460061001.05
    compressor bearing7308C3630840902346.329.413000170000.657
    compressor bearing6308-Z/Z260308Z24090230.636
    compressor bearing6308-Z/Z3-4090230.636
    compressor bearing6308-2Z/Z2-4090230.636
    compressor bearing6308-2Z/Z380308Z34090230.636
    compressor bearing6308-RS1803084090230.636
    compressor bearing6308-2RS/Z2-4090230.636
    compressor bearing6308-RS/Z2-4090230.636
    compressor bearing6308-RS/Z3-4090230.636
    compressor bearing6308-2RS/Z3180308Z34090230.636
    compressor bearing6308-LS-40902340.82448000-0.63

    compressor bearing compressor bearing compressor bearing

    Quality 6308 2RS Compressor Precision Ball Bearing 40mm P5 High Speed Reducer for sale
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    Send your message to this supplier
    *From:
    Your email address is incorrect!
    *Subject:
    Your subject must be between 10-255 characters!
    *Message:
    For the best results, we recommend including the following details:
    • --Self introduction
    • --Required specifications
    • --Inquire about price/MOQ
    Your message must be between 20-3,000
    Yes! I would like your verified suppliers matching service!
    Send your message to this supplier
     
    From:
    Enter your email please.
    To: UIB (Xiamen) Bearing CO.,LTD.
    Subject:
    Message:
    Characters Remaining: (0/3000)
     
    Explore more Precision Ball Bearing products from this supplier
    Find Similar Products By Category:
    Inquiry Cart 0

    Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们

    Copyright © 2009 - 2018 burrillandco.com. All rights reserved.