Emerson DeltaV Power Supply Redundancy Module KJ2003X1-BA2 VE3005
Both NEW and USED are available.
Manufactured by EMERSON DELTAV
- LocalBus Power Rating:5VDC 1.4A Max.
- Ambient Temperature:0℃-60℃
- Fisher-Rosemount System Controller MD Plus
- Condition:New / Used
- 1 YEAR WARRANTY
Alternate Part Number:
- EMERSON 12P2093Xxxx
- EMERSON VE3005
This solution provides an upgrade to the RS3™ ControlFile with
DeltaV™ controllers using the M-series
DeltaV Controller Interface for RS3 I/O. This solution incorporates
RS3 I/O to be integrated into the DeltaV
architecture. The “heart” of the controller interface is a new
DeltaV module that supports the serial I/O
communication capacity of the RS3 ControlFile. The DeltaV
Controller Interface for RS3 I/O may be used
with both RS3 FlexTerm and MultiPoint I/O subsystems. Additionally,
RS3 I/O support is integrated into the
DeltaV Explorer, Diagnostic, and Control Studio applications.
The DeltaV Controller Interface for RS3 I/O is comprised of the RS3
I/O Interface Module, the RS3 Interface Carrier and the integration
of RS3 I/O into DeltaV software.
RS3 I/O Interface Module.
The RS3 I/O Interface Module is a 2-wide module that provides
serial communications between RS3 I/O and DeltaV controllers.
The module supports serial communications with both RS3 FlexTerm
and MultiPoint I/O subsystems.
The RS3 I/O Interface Module features 64 serial communication
channels providing serial communications to the installed RS3 I/O.
The RS3 I/O Interface Module, in effect, takes over the serial
communication task of the ControlFile with the DeltaV controller
managing the process.
The RS3 I/O Interface Module is designed with redundancy in mind.
One-to-one redundancy is built in. As with RS3, should you have an
application that requires optimum system availability, redundancy
is an option.
DeltaV MQ or MX Controller.
One DeltaV MQ controller (with DeltaV v12.3 or later firmware) or
MX controller (with DeltaV v10.3) mounts on the carrier for a
simplex installation, or two MQ or MX Controller mount for a
The MQ controllers can handle up to 750 DSTs while MX controller
can handle up to 1500 DSTs.
RS3 I/O Interface Carrier.
The RS3 I/O Interface Carrier is a 19 inch rack mount device
specifically designed to accommodate the RS3 I/O Interface.
The carrier will accommodate these DeltaV modules:
1.Two DeltaV MQ or MX Controller
2.Two DeltaV System Power Supplies
3.Two RS3 I/O Interface Modules
4.The RS3 I/O Interface Carrier has eight (8) multi-channel
connectors to provide connection to RS3 I/O.
Additionally, the RS3 I/O Interface Carrier features a 37 pin
railbus connection that may be used to interface with additional
M-Series DeltaV I/O modules. Standard 37 pin DeltaV interface
cables are used to connect the RS3 I/O Interface Carrier to
traditional DeltaV I/O horizontal carriers. This feature means that
you can expand your system with DeltaV I/O to fully utilize your
DeltaV controller investment. DeltaV Programmable Serial Cards may
also be used to connect PLCs and other serial devices that were
connected to the RS3 ControlFile through the PLC FlexTerm.
Address:23A BlockB,Lushan Building,Chunfeng Road,Luohu