Sign In | Join Free | My
Home > Other Electronic Components >

Copper PLA 3D Printing filament 1.75mm

    Buy cheap Copper PLA 3D Printing filament 1.75mm from wholesalers
    Buy cheap Copper PLA 3D Printing filament 1.75mm from wholesalers
    • Buy cheap Copper PLA 3D Printing filament 1.75mm from wholesalers
    • Buy cheap Copper PLA 3D Printing filament 1.75mm from wholesalers

    Copper PLA 3D Printing filament 1.75mm

    Ask Lasest Price
    Brand Name : YouSu
    Model Number : YS-CPLA-1.75-25
    Certification : RoHS
    Price : 5.99~19.99 USD
    Supply Ability : 60 tons per month
    • Product Details
    • Company Profile

    Copper PLA 3D Printing filament 1.75mm

    High Strength 3mm 3D Printer Filament Red Consumables MakerBot / Mendel

    Quick Detail:


    Copper PLA 3D Printing Filament


    1.75 mm




    250 g / spool

    Support machine

    All 1.75mm 3D Printer


    CE,RoHS, FCC


    Print temperature: 210 - 230℃
    filament net weight: 250g
    (1) high strength, good toughness;
    (2) Strength than PLA;
    (3) diameter of 1.75mm, variations + /-0.04mm,roundness +/-0.03mm;
    (4) cost-effective, can be processed in wide range temperature;
    (5) 1 kg /plastic spool packaging, can be automatic feed;
    (6) to be applied to a variety of 3D printer, Makerbot, Mendel, Prusa, Huxley, BFB series, etc..
    (7)density is small, when printing larger volume model lighter, save money;





    Copper PLA



    Filament diameter




    Print temperature

    210 - 230 celsius

    Spool capacity

    1kg(Can be customization)


    How to get a perfect printing model?

    In fact you want to get a perfect printing model, you need a reliable printer with the 3D printer at right temperature under right parameter setting. It means that your printer should under good condition, your filament should be good enough. The following tips are based on this question.

    Tip 1: What is your idea printing temperature?

    In fact different printer series and different printer sensor has different temperature tolerance. Regardless sensor difference, the printing temperature of REPRAPPER ABS filament is 200~260, the idea temperature is 230. Different color has little variance. The printing temperature of REPRAPPER PLA filament is 170~240, the idea temperature is 210. Different color has little variance.
    For UP and Afinia printer, you can use it directly under ABS or PLA mode (Depends on what material you bought). For Makerbot etc printer that allows you change the temperature, you can set a temperature (e.g. 230), then extrude the filament manually before printing. If you saw the filament can flow up smoothly without bubble, it means that temperature is ideal setting.

    Tips 2 How to avoid printing parts tilt?

    It is very important for the first layer. You want to get a successful printing model you need to assure the platform is leverage. If the platform is not leverage the probability of tilt will increase. Before you begin your job you need to confirm the nozzle to all platform distance is the same.
    The filament can be stick on ABS board/ solderless breadboard/3M blue tape/Kapton tape etc.
    When you printing, the closer between nozzle to platform the better but should not break the platform.

    Tips 3. How to avoid printing failure?

    Before you begin your job, you need to confirm:
    1) The filament is good, no clog and with consistence diameter. Wired well.
    2) The filament feed system can feed the filament smoothly to avoid lack of filament in the extruder during printing.

    During printing you need to confirm:

    1) The temperature is ideal and the extruded filament at nozzle is smoothly without bubble.
    2) The first layer is OK as mentioned above.
    If you avoid these issue but your still print failure parts, it may caused by your printer’s reliability. According our experience, the distinguish of a good printer or bad printer is their reliability. For FDM mode printer, for one or two model, all printing results is similar regard the surface. But when print 100 times will them success 100 times is the make difference point. er are competitive. For example, for Z axis movement, if your setting is 0.2mm, will they move 0.2mm exactly? If higher than 0.2mm the extruded filament may not stick to the near bottom printing model. If less than 0.2mm it may make the nozzle touch the printed model. Both of that will cause failure printing.

    Quality Copper PLA 3D Printing filament 1.75mm for sale
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    Send your message to this supplier
    Your email address is incorrect!
    Your subject must be between 10-255 characters!
    For the best results, we recommend including the following details:
    • --Self introduction
    • --Required specifications
    • --Inquire about price/MOQ
    Your message must be between 20-3,000
    Yes! I would like your verified suppliers matching service!
    Send your message to this supplier
    To: Guangzhou Yousu Plastic Technology Co., LIMITED
    Characters Remaining: (0/3000)
    Explore more PLA 3D Printer Filament products from this supplier
    Find Similar Products By Category:
    Inquiry Cart 0

    Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们

    Copyright © 2009 - 2019 All rights reserved.