PHPA Anionic Polyelectrolyte Blufloc A 4515 Saltless Flocculant
PHPA Blufloc A-4515 Anionic Polyeletrolyte Medium Molecular Weight
Polymer Water Treatment, Paper mill,Sugar Mill, Oil Field CAS No. 9003-05-8 A-4515 Grade
Blufloc PHPA A-4515 Description:
- PHPA is short for partially hydrolyzed polyacrylamide, which is
polymer for drilling mud additive.
- Can be used in both industrial and oil / gas drilling
- Can be used in both fresh water and brines but requires high
- Applicable in: shale stabilization, viscosities, friction
reduction, fluid loss control and lubrication
- Can also be used mud additive for EOR (Enhanced Oil Recovery)
process to improve production of oil gas drilling chemical .
- Bluwat PHPAAnionic Polyelectrolyte A-4515 (APAM) is a water soluble
polymer formed from acrylamide (a compound with the molecular
formula C3H5NO) subunits.
Blufloc A-4515 Specifications:
Off-White Granular Powder
Low to Medium
Approximate Brookfield viscosity at 25° C:
Specific Gravity at 25°C:
PH (1% aqua solution):
Storage Temperature (°C):
0 - 35
Blufloc PHPA A-4515 Application Fields:
Oil-displacing Agent of Oil Field Tertiary Oil Recovery:
It can adjust the rheology of filled water, increase the viscosity
of driving liquid, improve water drive wave and efficiency, lower
water phase permeability in ground layer, and enable water and oil
to flow forward at even speed. Its effect is that it is mainly used
in tertiary oil recovery of oil fields in the aspect oil
production, and raw oil of about 100 to 150ton more can be produced
through filling the macromolecule polyacrylamide product one ton.
Well Drilling Mud Raw Materials:
In oil field exploration and development and exploration of
geology, water and coal, it is used as adhesive of well drilling
mud raw materials, can improve the service life of drill bits,
improve the drill speed and drilling footage, and reduce plug in
replacing drill, and has prominent well slough preventing effect,
and it can be used as fracturing fluid of oil fields or plugging
agent of controlling profile and plugging water.
The polarity gene adsorbs the solid particles dispersed in water,
bridges between the particles and formats the large aggregates,
sedimentation and separates of water, flocculates detritus and clay
in drilling fluid.
In the drilling mud treatment, this product can improve the
lubricity and stability of the mud to reduce the water loss,
prevent sticking effectively, increase drilling efficiency.
The product can generate cross linking under the effect of Al3+, Fe
3+, Ca2+ and other ions, a part of high molecular compound is
changed from linear shape into body shapes. The product is not
watersoluble, and can be adsorbed on the borehole to block ground
layer gaps and topreven the leakage of drilling fluid.
The product can be absorbed on the surface of metal or clay
particles to form liquid film to change friction on the solid
surface into liquid frication, thereby lubricating drill bits and
drills, lowering the mud cake frication coefficient, and reducing
Fluid Loss Additive:
The hydrolysis degree is higher, the hydration group on the
molecular chain is more, the hydration is better, and it changes
from flocculant into fluid loss additive. Drilling mud should be
treated to keep cake’s permeability as low as possible in order to
maintain a stable borehole and to minimize filtrate invasion, and
damage to the pay zone.
Shale Inhibition Agent:
The multipoint adsorption of polymer formats to the crisscross
membrane macromolecules, plays a role of enhancing the stability of
As chemical mudding agent for plugging water of dikes, ground
channels and the like.
Used as fixing agent, residency agent, filtration aid and paper dry
intensity reinforcing agent in paper-making industry.
Dissolved into 0.3% concentration and cross-linking agent added. It
can be sprayed on desert to prevent and solidify sand.
Oil field profile controlling and water- plugging agent, matched
and a certain amount of chemical adhesive added. It can be used as
oil field profile
controlling and water-plugging agent.
In oil field, as a kind of mud additives.
To increase the viscosity of water and improve the effectiveness of
the water flooding
For sugar and juice flocculation, sedimentation, clarification and
It can preserve water and solidify sand for soil and can play a
role of humectant on slope grass planting, tree planting, and sand
solidification and dust prevention of soil.
Textile Sizing, as a kind of composition for chemical grout, starch
Highly improve the adhesive property, penetrability and desizing
performance, enable the textile to have electrostatic prevention
performance, reduces the desizing rate, and reduces the starch
mixing spots, cloth machine breaking efficiency, and falling
Blufloc A-4515 Competitive Advantage:
|1||Professional manufacturer in China over 65000mt annual.|
Economical to use - lower dosage levels.
Easily soluble in water; dissolves rapidly.
10 years manufacturing experience, with more than 20 technical
Blufloc A-4515 Package and Storage:
- Packed in Kraft or PE bags with inner plastic bags, with each bag
containing 25kgs, or 750kgs net big bag.
- Stored in original packaging in cool and dry place, away from
sources of heat, flame and direct sunlight.
Blufloc A-4515 Anionic Polyacrylamide/Polyelectrolyte Picture: