SS Wide Auto Non - Woven Fabric Folding Machine Environment
Equipment with innovative design of multi - function - shaped
folding machine, with a set of plug - in - style, mobile - cutting
knife system, is the first domestic. The equipment adopts pneumatic
counting device count, with positive and negative cloth guide
conversion device. The cutting tool imports, durable and not easy
to heat, and equipped with automatic grinding device, ensure the
accuracy of the finished product. From the raw material conveying -
fold - cutting - count and finished automatic completion.
Customizable Folding Product Size
High Precision Wire Cutting Process
n, w Fold, Fold, Fold Shaped Folding, Can Be Customized
Frequency Conversion Speed Control
300-600 / Min
Depending On The Configuration, Models And Set
50hz 3.5-6.5kw 380v
1.250 mm folding machine size: length 3.6 meters, width 0.9 meters,
height 1.7 meters.
2. Mechanical properties: A. to adopt a consistent mode of
operation, from the raw material folding, cutting, automatic
counting and band saw blade cutting folding finished products, neat
incision, the left and the right of equal length, imported durable
not easy fever, equipped with automatic knife grinding device,
sending the finished product out a double row parallel C. the
electronic counting device, can be arbitrarily set each bundle
packing required number of sheets, cloth every beam between
high-low ladder type convenient D. mechanical low speed or high
speed can be stepless variable speed, high stability, F. paper
folding method adopt a folded plate and a knife folding paper,
adjusted after fold transformations, as shown in figure shown in
the fold n, m, Z, W,1 / 4.
3. The equipment working table to withstand the weight plate
thickening. Band saw wheel with pig iron casting production, and
the wheel surface technology processing, outer package special
cloth to reduce noise, and to play a role in pollution prevention,
stable cutting, cutting knife is not running.
4. Tail rack mounted paper at the install a wide belt
synchronization conveying device and control the tension. Sealing
plate use of spray processing. Longmen frame by universal bearing
5 Production speed: 250 mm folding 500-600 film on / down / min
(according to the material of the paper), according to the tension
of the paper, the machine can adjust the size of paper tension two,
in order to ensure the folding of the finished size.
6. Folding machine folding and needed to be heightened, the
material with high-quality domestic 45# steel, quenched hardness of
HB220-280 degree of surface plating hard chromium; meridian of
paper clips in the cutting process, plywood using high quality
stainless steel, crack must close smooth seamless. Clip paper knife
and chuck for a tight fit, workmanship exquisite not loose. Disc
adopts screw rod to adjust the deviation of the paper, can
transform a variety of folding method. The tail is provided paper
with double stent solid, stable feed, bias is small, and the other
by a new way of removing, and the disassembly is convenient and
easy to use.
7. The bearing seat materials using high-quality domestic 45#
steel, uses the high quality bearing. Tail rack configuration for
wide belt synchronous transmission. With automatic knife grinding
device and automatic counting device. Note: (reduce A. count voice;
B. folding stick below the slider curvature increase, reduce the
sound; C. folding stick in front of the conveying roller use double
transport, top gear positioning, improve the folding stability.; D.
the trough the pull type device, tool changing operation is
convenient; e. console stainless steel laying and appearance than
the original beautiful; electrical wiring specification is
reasonable; F. equipped with imported cutter with cutting).
8. Surface of the machine and the tank is made of stainless steel
plate, the knife to a trough end length of 0.8 meters. The folding
machine folding, flat, smooth, standard size. Bearing materials by
domestic high-quality 45# steel surface plating chrome.
9 Equipment with frequency conversion, the total power of 3.5
kilowatts, electrical wiring specification is reasonable,
beautiful, easy to operate.
10. The whole machine rack with GB molding steel, surface rust
spray treatment, all machine bedplate must do antirust coating
processing, frame welding is accurate in size, the stent of
appropriate reinforcement, belt wheel, bevel gear and all
transmission part, the accuracy of center, the gear is mainly
divided into pieces, easy to adjust the gap. To ensure the stable
operation of the machine.
11. Standard fasteners used in all hexagonal screw and high-quality
domestic 45# steel. On the finished product is easy to cause the
influence of parts are all made of stainless steel materials.
Machine all plating are divided into secondary electroplating,
smoothness is good to ensure smoothness for all the parts of the
machine, anti rust resistant degree, equipment II years will not
12 Long term on the characteristics of the equipment for a variety
of paper technical guidance.