| Sign In | Join Free | My burrillandco.com |
|
... pH electrodes with temperature to measure temperature changes in aqueous solutions. It is a patented temperature drift compensation technology, which makes the instrument more stable and accurate in all kin...
... of an electric field. Metals are good conductors and therefore exhibit a large conductivity. In liquids, particularly aqueous solutions, the conductivity is greatly affected by the amount of dissolved charg...
... Meter Digital RS485 OTA For Wastewater Treatment Brief Introduction Measuring conductivity ratios in aqueous solutions is becoming increasingly important for impurity measurements in water or for concentrat...
... are inserted in the water, after being energized, the charged ions will move in a certain direction under the action of the electric field. The anions in the water move to the anode to make the aqueous solu...
Y09-AG310PS Polydisperse particles (cold ) Aerosol Generator This type of generator is typically capable of spraying aqueous solutions (e.g. salt), suspensions , or oil or alike substances. They serve a variety...
Y09-AG310PS 50-2000cfm (1.4-56.6m/Min) Aerosol Generator This type of generator is typically capable of spraying aqueous solutions (e.g. salt), suspensions , or oil or alike substances. They serve a variety of...
... 600 300 ** Single phase only. Single Phase Multi Element PTFE Tank Immersion Heaters Description : 1. USAGE: Inert to most aqueous acid, alkaline, anodizing and pickling solutions. 2. Outstanding Performanc...
... and pickling solutions. 2. Outstanding Performance: Low wat density design( 10 watts/square inch, 1.5 w/cm2 ) for long service life. 3.Safety ......
...solutions Tank Heaters Industrial Immersion Heaters Power(W) Voltage(V) Diameter (MM) Hot Zone (MM) Total Length (MM) 1000 220/380 50 250 430 2000 220/380 50 350 550 3000 220/380 50 450 650 4000 220/380 50 6...
Heat exchangers of FEP/PFA - Coil Heat Exchangers & Immersion Heat Exchangers For heating or cooling of most aqueous acid and alkaline solutions. All wetted parts of fluoropolymer (FEP, PFA or PTFE) constructio...
...function, supporting pH electrodes with temperature to measure temperature changes in aqueous solutions. It is a patented temperature drift compensation technology, which makes the instrument more stable and...
... Crystal Electrolyte Online ORP Sensor 0~100℃ Working TEMP For Sewage The sensor can measure the ORP redox potential of the aqueous solution in the pipeline, open container, and pool. Specification: Product ...
...aqueous solutions. The chief factor influencing the economy of an evaporator system is the number of effects. By increasing the number of effects we can increase the economy of an evaporator system. The firs...
...methods used for the concentration of aqueous solutions. The chief factor influencing the economy of an evaporator system is the number of effects. By increasing the number of effects we can increase the eco...
... Multiple Effect Evaporation remains one of the popular methods used for the concentration of aqueous solutions. The chief factor influencing the economy of an evaporator system is the number of effects. By ...
... Hafnium chemical properties and zirconium is very similar, with good corrosion resistance, not easy to be eroded by general acid and alkali aqueous solution; Easily soluble in hydrofluoric acid to form fluo...
...sensor, with digital interface (RS485*1), can be used to measure the change of ORP value in aqueous solution system within the range. It has standard RS485 Modbus RTU protocol interface function, and can com...
... the steel pipe first. In order to remove iron oxide on the surface of the steel pipe, after pickling, it is cleaned in ammonium chloride or zinc chloride aqueous solution or ammonium chloride and zinc...
... iron and steel parts first. In order to remove iron oxide on the surface of iron and steel parts, after pickling, it is cleaned in an ammonium chloride or zinc chloride aqueous solution or a mixed...
... iron and steel parts first. In order to remove iron oxide on the surface of iron and steel parts, after pickling, it is cleaned in an ammonium chloride or zinc chloride aqueous solution...