| Sign In | Join Free | My burrillandco.com |
|
... of busbar system. Meet the standard: Comply with GA/t537-2005 test method for the main line system (bus) fire retardant, fire and fire resistance, GB/T9978 standard. Main parameters: 1. Working ......
...Cable Testing Equipment Static Flexibility Tester Clamp Height 1.5m At Least Standard:IEC60245-1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 1:General requirements,IEC60245-2 cl...
... for mechanical strength testing of finished flexible cables. This test is not applicable to cables with more than two concentric layers whose conductor nominal cross-section exceeds 18 cores. Sample scope: ...
.../750 V-Part 1: General requirements clause 5.6.3.1, IEC60245-2 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods clause 3.1 Figure 1, IEC60065-1 clause 16.3 b) Standar...
...Cable Testing Equipment Product Introduction with Cable Testing Equipment: Static flexure testing machine HDX1303 Comply with standards: IEC60245-1, IEC60245-2. Purpose: used for mechanical strength testing ...
...Test Apparatus HDX1314 Description: This device is used for the resistance abrupt pull test of Plug of plug power line, torsion test, load test and grounding current test. According to the standard UL817 cla...
... of vertical flame spread, heat release and smoke production of vertically-mounted bunched wires or cables, electrical or optical, under defined conditions. EN 50399 details the apparatus and the arrangement...
...IEC60245-2 clause 3.1 Figure 1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods. Application:It is used for checking mechanical strength of completed flexible cables....
...Cable Testing Equipment , Cable And Wire Spark Tester 1.Quick Details: Alternative name Cable and wire spark test machine Function test wire insulation quality in cable production line Feature Electric drive...
...Cable Testing Equipment , Cable And Wire Spark Tester 1.Quick Details: Alternative name Cable and wire spark test machine Function test wire insulation quality in cable production line Feature Electric drive...
...drive Weight 87kg Volume 91×55×99cm Test standard UL, IEC, VDC 2.Equipment Description: The cable bending tester is used for testing bending resistance of outgoing line of power plug and wires. Fix the wires...
...drive Weight 87kg Volume 91×55×99cm Test standard UL, IEC, VDC 2.Equipment Description: The cable bending tester is used for testing bending resistance of outgoing line of power plug and wires. Fix the wires...
...Cables Flexing Tester HDX1302 Test object Completed flexible cables Test Flexing test Standard IEC60245-1, IEC60245-2 figure 1 Current loading 0-25A Voltage loading 0-400V Testing speed 0.33m/S Testing dista...
... and optical cables-part 1-4: Methods for general application-Test at low temperature. Application:It is used to test at low temperature for insulating and sheathing materials of electric cables. Test sample...
...Test Device Product Info: Meet standards of GB/7000.1-2002 Chapter 4.14. And EN60598-1:2000 Function: Applied to testing adjustment device with soft cable and wire built in to check if its shares of conducto...
...Test Device Meet standards of GB/7000.1-2002 Chapter 4.14. And EN60598-1:2000 Function: Applied to testing adjustment device with soft cable and wire built in to check if its shares of conductor breakdown is...
....2 clause 22.7. It is used for checking mechanical strength of completed flexible cables. This test does not apply to flexible cables with cores of nominal cross-sectional area greater than 4mm2and cables ha...
Cable Testing Equipment Thermostatic Control Oil Bath For Wire Industry 1. Quick Details: Alternative name High temperature oil bath Function Test capability of cables under high constant temperature Feature El...
... Feature Electric drive Weight 100kg Volume 600×1500×700cm Test standard JIS, CNS Equipment Description: Heating deformation testing machine imposed load in high-temperature environments and measurement of c...
... for the pull force test of clip-mounted luminaires. Test requirements: 1). A pull is applied on the cable without jerk for 1 min in the most unfavourable direction in normal use. During the test the clip is...