| Sign In | Join Free | My burrillandco.com |
|
... two flat surfaces. The force for the crushing is to be applied by a hydraulic ram with a 32mm diameter piston. The crushing is to be continued until a pressure reading of 17.2 Mpa is reached on the hydrauli...
...plug life of the device's male and female plugs, simulating the manual test of the test piece and the female plug, accurate and effective plug life test, high reliability, for Test the insertion and with...
...Force Testing Machine This machine is suitable for many kinds of connector plug and unplug test, adopts embedded microcomputer measurement and controller, can display the insert force, pull out force, real-t...
...Force Testing Machine This machine is suitable for many kinds of connector plug and unplug test, adopts embedded microcomputer measurement and controller, can display the insert force, pull out force, real-t...
...Force Test Device Complied Standards & Clauses for Charging Interface Insertion Force Test Device IEC 62196-1:2020 clause 14.1.5, 14.1.6, fig13, fig14. IEC 62196-1:2014 clause 17.2. Technical Parameters for ...
... Testing Equipment Holder Axial Force Tester IEC 60598-1 clause 4.4.4 Fluorescent Lamp Holder Axial Force Tester Product information: The test equipment is designed and manufactured according to IEC60598-1 c...
... by single-phase speed-regulating motor to drive the eccentric mechanism, the motor speed is adjustable, to ensure the accurate time for each pull force applied; torque is achieved by...
...Testing Equipment Table Vise Clamp Vice Jaw Height 28MM Application: To determine whether the components of toys can be removed by tensile force. A Force gauge is used in conjunction with a clamp to record t...
... accessories’ surface. Parameters: The size: L*W*H=90*43*46mm Weight:750g Material: stainless steel Package: wood age force 0-18 month 25+0.51bs 18-36 month 50+0.5lbs 36-96 month 100+0...
...Testing Equipment Product information To determine whether the components of toys can be removed by tensile force. A Force gauge is used in conjunction with a clamp to record the force applied. Any projectio...
...Force Testing Machine Product Introduction: This machine is suitable for a variety of connector plug-in tests. It adopts embedded microcomputer measurement and control technology, which can display insertion...
... test item requirements, test content: axial pressure is applied to the G5 lamp holder of 15N, 30N axial pressure exerted on the G13 lamp holders, ......
...Force Vibration Test Equipment For Multi Axis Vibration Testing with ISTA IEC EV series of electromagnetic vibration testing system simulates the vibration environment under the laboratory condition, and te...
...-2-52 Appendix CC.2.2 Impact test of mattress support table. According to IEC60601 section 9.4.2.3 Instability. According to IEC60601 section 9.8.3.3 human body test mass. 2 IEC60601 section 9.8.3.3 2.1) Ext...
...vital to determine the compression strength of the box in order to make sure that the box will be able to resist the anticipated compressive forces and to determine the load that the box will be able to with...
... test standard. Model Rated Sine Force (N) Rated Random Force (N) Frequency Range (Hz) Rated Acceleration (m/s2) Rated Speed (m/s) Rated displacement (p-p)mm Max. Loading (Kg) moving coil (......
... machine (UTM), is an electromechanical testing system that applies tensile (tensile) force to materials to determine their tensile strength and deformation behavior before fracture. A typical tensile testin...
...Testing Machine 20-Station Multi-Busbar Horizontal Photovoltaic Welding Tape Peeling Force Testing Machine Equipment Equipment summary: The horizontal photovoltaic welding tape peeling force tester uses a PC...
...Force Test Mpi Calibration Block Detailed description: I. Introduction and requirements of N1 45N magnetic particle lifting force test block: 1.N1 type 45N magnetic particle lifting force refers to the magne...
Mandrel Test Device IEC Test Equipment 150N Test Force Manual Control Standard: IEC 61558-1 ‘Safety of transformers, reactors, power supply units and combinations thereof – Part 1: General requirements and test...