| Sign In | Join Free | My burrillandco.com |
|
... dB minimum - High open-loop voltage gain: 100 dB minimum - High output current: 30 mA - Wide power supply range: 4.5 V to 36 V Package: 8-pin ......
... Voltage Range: -0.5V to VCC+0.5V -Input Current: ±1mA -Output Current: ±50mA -Open-Loop Gain: 80dB -Propagation Delay: 20ns -CMRR: 100dB -Package: 8-pin SOIC Why buy from us >>> Fast / Safely / Conveniently...
...: 5 μA - Isolation test voltage: 2500 VRMS - High gain linearity - Low saturation voltage - Low crosstalk - Low propagation delay - Low power dissipation Applications: - Motor control - ......
Product Listing: TLP7820(TP4,E) Amplifier IC Chips Features: • Wide gain bandwidth product (GBWP): 4MHz • Low noise: 0.8nV/√Hz • Low distortion: 0.002% • High output current: 100mA • ......
Product Listing: ADL5303ACPZ-R7 Low Noise Amplifier IC Chips Features: Low noise figure: 1.7 dB High gain: 30 dB High linearity: +35 dBm OIP3 High power supply rejection ratio Operating voltage range:...
AD8221ARMZ-R7 Low Power, Wide Bandwidth, Differential Amplifier IC Features: - Wide bandwidth: 1.5GHz - Low power consumption: 1.6mA (typical) - High gain: 66dB - High linearity: 0.1dB - Low offset voltage: 0.2...
Product Listing: AD627ARZ-R7 - Low Noise Wideband Amplifier IC Chip Features: Low Noise: 0.25nV/Hz High Slew Rate: 10V/s Wide Bandwidth: 50MHz Low Offset Voltage: 5mV High Gain: 100dB Low Input Bi...
...a low-noise, high-performance, single-supply, low-power operational amplifier. Features: -Wide supply range: 2.7V to 36V -Low input offset voltage: 2mV max -Low noise: 2.5μVrms -High gain bandwidth product: ...
Product Listing: ADA4000-1AUJZ-R7 Amplifier IC Chip Product Parameters: - Supply Voltage: 4.5V to 18V - Maximum Output Power: 4W - Maximum Output Current: 1A - Output Impedance: 600ohm - Gain: 36dB - Frequency ...
....5V • Low Supply Voltage: 2.7V • Slew Rate: 0.02V/µs • Common Mode Rejection Ratio: 110dB • Gain Bandwidth Product: 4MHz • Temperature Range: -40°C to +85°C • Package: 8-Pin SOIC Why buy from us >>> Fast / S...
Product Listing: AD8332ARUZ-R7 Amplifier IC Chips Features: - High Gain: up to 120 dB - Wide Bandwidth: 1.0 MHz to 2.0 GHz - Low Noise: -107 dBc/Hz - Low Distortion: -70 dBc - Low DC Offset: -50 dBm - Low Power...
SSM2167-1RMZ-REEL Audio Power Amplifier IC Features: High Gain Bandwidth: 10MHz Output Power: 8W Supply Voltage: 4.5V to 5.5V Low Distortion: 0.004% Low Noise: -90dBV Input Impedance: 10k Output ...
SSM2211S Audio Amplifier IC Chip Product Specifications: • Operating Voltage: 4.5V to 16V • Maximum Output Power: 2.5W • Output Impedance: 4 ohms • Frequency Response: 20Hz to 20kHz • THD+N: 0.01% • Slew Rate: ...
...1mA • Low output noise of 0.003uV • High gain of 94dB • Small package size of SOT-23-6 • Output short-circuit protection • Thermal shutdown and over-voltage protection • High ......
AD8602ARMZ-REEL Amplifier IC Chips Features: Low distortion: 0.003% at 2.5 V P-P, 10 kHz Low noise: 0.1 V RMS, 10 Hz to 10 kHz Unity gain stable High common-mode rejection: 130 dB Input impedance: 20...
Product Listing: Product Name: ADA4075-2ARZ-R7 Amplifier IC Chip Package: SOT-23-5 Operating Temperature Range: -40C to +85C Supply Voltage Range: 4.5V to 18V Output Current: 200mA Gain Bandwidth Product: 1.3...
... of 4nV/√Hz -High slew rate of 10V/µs -Low input bias current of 10nA -Output current up to 100mA -Unity-gain stable -High output voltage swing -Compact SOP-8 package Why buy from us >>> Fast / Safely / Conv...
... amplifier IC chip from Analog Devices. Featuring a wide frequency range of 10Hz to 10MHz, this chip is suitable for a variety of applications from audio signal amplification to instrumentation. With a total...
...°C to +125°C - Offset Voltage: 0.2mV Max - CMRR: 120dB Min - Gain Bandwidth Product: 0.6MHz Min - Input Bias Current: 2.5nA Max - Output Current: 20mA Max - Output Noise ......
Product: ADA4530-1ARZ Amplifier IC Chips Parameters: - Supply Voltage Range: 5.0 V to 12.0 V - Maximum Output Voltage: ±17.0 V - Gain Bandwidth Product: 3.0 MHz - Input Voltage Noise: 0.5 nV/√Hz - Output Voltag...