| Sign In | Join Free | My burrillandco.com |
|
... due to its high strength, high hardness, and low thermal expansion coefficient. Si3N4 ceramic ball is the most widely used form of this material. It has a dielectric constant of 9.2-9.6, a thermal expansion...
... composed of silicon and nitrogen. It has high hardness of 13.9GPA, excellent bending strength of 700 MPa, remarkable dielectric strength of 18-20 KV/mm, high density of 3.2 G/cm3, and outstanding compressiv...
... resistance of 1012-1014 Ω.cm. This material is also known for its dielectric constant of 9.2-9.6, making it one of the best insulators available. Silicon Nitride Ceramics has excellent thermal shock resista...
...Silicon Nitride Ceramics (SI3N4 ceramic balls) are advanced technical ceramics, featuring outstanding mechanical, electrical, chemical and thermal properties. They have a low Poisson's Ratio of 0.27, high di...
...Dielectric Compound Basic Properties Property Unit Value Appearance White Specific Gravity (25°C) 2.45 Penetration (JIS K 2220) 310 Thermal Conductivity W/m·K 0.84 Dielectric Constant (60Hz) 5.0 Dissipation ...
...Silicone Adhesive Sealant for Electronic Insulation Product Properties Property Units Value Uncured Properties (23°C, 50% RH) Appearance Non-sag paste, clear/white/black Tack-free Time min 7 Cured Propert...
... kV/mm Dielectric Constant 2.9 (60Hz) - Dissipation Factor 0.005 (60Hz) - Volatile Siloxane 0.028 wt% Product Introduction TSE3975 is a one-component, high-viscosity flowable silicone adhesive/sealant f...
...properties (light transmittance over 95%), ultra-low thermal expansion coefficient (0.5×10⁻⁶/℃), and excellent dielectric properties (dielectric constant 3.9). Whether for demanding optical lenses, semicondu...
... Strength MPa 1.9 Elongation % 380 Adhesive Strength (Aluminum) MPa 1.7 Thermal Conductivity W/m·K 0.18 Volume Resistivity Ω·cm 1×10¹⁵ Dielectric Strength kV/mm 23 Dielectric Constant 60Hz 2.9 Dissipation Fa...
...dielectric constant of 9.2-9.6, a thermal conductivity of 25-35 W/m.K, and a black color. This material is widely used in a variety of applications, such as the production of mechanical components, bearings,...
Silicon Nitride Ceramics 3.2 G/Cm3 Density 20 W/M.K Thermal Conductivity 7 MPa Fracture Toughness Product Description: Silicon Nitride Ceramics, also known as SI3N4 ceramic ball, is a high-performance ceramic m...
...silicone coated impregnated fiberglass fabric Thickness: 0.65mm Silicon Coated Fiberglass Fabric: 1.used in the temperature from -70℃ to 300℃ 2.resistant to ozone, oxygen, sunlight, and aging, long using lif...
Product Description: Silicon Nitride Ceramics (SI3N4 ceramic ball) is a high-tech material with excellent properties and wide application. It has a dielectric constant of 9.2-9.6, which is much higher than that...
...Dielectric constant of 3.49~9.8@1MHz, the Silicone Thermal Pad is an excellent insulator, ensuring that your device is protected from electrical interference. Its Density of 3.0±0.5 G/cm³ ensures that it is ...
.... Additionally, this thermal pad has a breakdown voltage of ≥10KV/mm, ensuring that it can withstand high voltage levels without breaking down. The Silicone Thermal Pad comes in four different colours: grey,...
...Silicone Rubber Heater Mat Constant Temperature 80X100mm Silicone Rubber Heating Pad The silicone heating pad uses silicone rubber as an insulator outside, and the Ni-Cr alloy wire as an electric heating ele...
... Thermal Interface Thermally Conductive Silicone Compound Product Properties Property Unit Value Appearance White-Opaque Specific Gravity(25℃) 2.30 Penetration 300 Thermal Conductivity W/m ·k 0.84 Dielectric...
...various metal oxides, plates, porcelain (pottery), mica, glass, plastics and other materials. The factors affecting dielectric loss and dielectric constant can be further understood by means of deterministic...