| Sign In | Join Free | My burrillandco.com |
|
... Surface Drop Test Equipment Technical Parameters Model AS-DT-150 Max. Weight of Test Samples 60kg Height of Drop (mm) 300~1500mm Max. Dimension of Test Sample W1000xH800xD1000 mm Falling Floor Size W1700xH5...
... it for 30 minutes, then connect the positive and negative terminals of the battery with wires, and ensure that all external resistances are at 80°C. ±20mΩ, monitor the battery surface temperature change dur...
... Surface Drop Test Equipment Technical Parameters Model AS-DT-150 Max. Weight of Test Samples 60kg Height of Drop (mm) 300~1500mm Max. Dimension of Test Sample W1000xH800xD1000 mm Falling Floor Size W1700xH5...
...Testing Equipment (Chamber Method) 1. Scope of Application It is suitable for testing the fire retardant performance of the fire retardant coating on the combustible substrate surface under laboratory condit...
..., including packing containers Ling, angle, surface can be tested, it mainly used to assess withstand drops of product packaging parts in the transport and loading, thereby improving and perfecting package d...
...Testing Equipment Use This machine is mainly used for resistance to alcohol soluble test of spraying products such as: buttons, plastic shell, coating surface, it also has a rubber friction testing function....
...Testing Equipment for Mattresses INTRODUCTION This mattress flammabiliy test instrument is designed according to GB/T 34441-2017, it can test combustion performance of soft furniture mattress exposed to flam...
... to the surface of combustible substrates under laboratory conditions. Conform to the standard: meet the requirements of GB/T 12441-2005 (Appendix C) test standard. Main parameters: Test station: 1 station. ...
...Test Equipment Complied Standards & Clauses It is designed and manufactured according to IEC 61851-1:2017 clause 11.6. Equipment Overview The system uses self-programmed software controlled by a computer. Al...
Test method for hot surface ignition temperature for A2L, IEC 60335-2-40 Annex KK KK.1 General The hot surface ignition temperature of A2L refrigerants shall be determined according to Annex KK. The refrigerant...
...Testing Equipment For Rubbing dyed color fastnessTest Description: The Rubbing dyed color fastness tester is used for testing decoloration degree of dyed fabrics and leather after friction. The test method i...
... on a flat surface.A 15.8mm (5/8 inch) diameter bar is to be placed across the center of the sample. A 9.1 weight is to be dropped from aheight of 610mm onto the sample. 4.Test standard:UN38.3,SJ/T11169—1998...
... the specimen by testers fixture, it looks like a cross. Then the tester is bending and rubbing the material until a certain time, after that remove the specimen, Observing the surface of the material is the...
...:The test sample is to be placed on a flat surface.A 15.8mm (5/8 inch) diameter bar is to be placed across the center of the sample. A 9.1kg weight is to be dropped from aheight of 610± 25mm (24±1 ......
... on a flat surface.A 15.8mm (5/8 inch) diameter bar is to be placed across the center of the sample. A 9.1 weight is to be dropped from aheight of 610mm onto the sample. 4.Test standard:UN38.3,SJ/T11169—1998...
....1, 24.5 and figure 8 Each specimen of plug or portable socket-outlet is then pressed between two flat surfaces with a force of 150 N for 5 min, as shown in figure 8. The specimen is checked 15 min after rem...
...Testing Equipment For Rubbing dyed color fastnessTest Description: The Rubbing dyed color fastness tester is used for testing decoloration degree of dyed fabrics and leather after friction. The test method i...
... the specimen by testers fixture, it looks like a cross. Then the tester is bending and rubbing the material until a certain time, after that remove the specimen, Observing the surface of the material is the...
... on a flat surface.A 15.8mm (5/8 inch) diameter bar is to be placed across the center of the sample. A 9.1 weight is to be dropped from aheight of 610mm onto the sample. 4.Test standard:UN38.3,SJ/T11169—1998...
...:The test sample is to be placed on a flat surface.A 15.8mm (5/8 inch) diameter bar is to be placed across the center of the sample. A 9.1kg weight is to be dropped from aheight of 610± 25mm (24±1 ......