Description:RJ45 Port 1000 Base 20KM Ethernet Fiber Media Converter
10/100/1000M auto-negotiate Ethernet optical fiber converter is
designed for communication broadband IP MAN with perfect LED. And
the optical module adopts SFP interface. It is much more flexible
to use and supports the broadcast filtering function and address
auto-learn function. So it is the controllable and manageable
product for telecommunication.
Product characteristics
1,Adapt wave division multiplex technology and realize the two way
transmission on one fiber;
2,Reception with dual wavelength ,and it must be used in pairs in
order to improve the system stability.
3,Optional modes of network management and non-network management
and non-network management mode;
4,Optional power supply is 5V,1A ; 220V AC/ - 48V DC;
5,Optional (External )outlay power supply and build-in(Inner) power
supply;
6,With the function of automatic recovery to prevent system halt;
Technical Parameters
1.Ethernet UTP Interface
Interface rate: 10/100 M, half/full duplex auto-negotiation
Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
MAC Address Capability: 4096
Connector: RJ45, support Auto-MDIX
2.Optical Ethernet interface
Wave Length: 1310nm, 1550nm
Interface rate: 100 M, half/full duplex
Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
MAC Address Capability: 4096
Connector: FC/SC
3.Power
Power supply: AC180V ~ 260V,DC –48V,DC +24V
Power consumption: ≤3W
4. Working environment
Working temperature: -10°C ~ 50°C
Working Humidity: 5%~95 % (no condensation)
Installing the Converter
Wear a grounding device for electrostatic discharge
Install the media cable for network connection
Verify that the voltage of AC power is correct and plug in AC power
cord
