LP5019NL 1000Base-T Low Profile Ethernet Magnetic Transformers
Gigabit Network
- Low Profile Ethernet Magnetic Transformers
- Isolation Voltage:1500Vrms
- Type:Surface Mounting Transformer
- Coil Structure: Toroidal
- 1000Base-T Low Profile Magnetics
| Dual Port, 1000 BASE-T Low Profile Ethernet Transformer Modules,
SMD,Rohs |
| LINK-PP Part Number | LP5019NL |
| Pulse Part Number | H5019NL |
| Speed | 1000BASE-T |
| Number of Ports | DUAL |
| Application - LAN | ETHERNET (NON PoE) |
| Package | SMD |
| Temperature | 0 TO 70 |
| AutomDX | YES |
| Comment | SAME AS NL VERSION |
| Configuration RX | T,C,S |
| Configuration TX | T,C,S |
| Construction | OPEN FRAME |
| Cores Per Port | 12 |
| Package Height (Inches) | 0.100 |
| Package Height (mm) | 2.54 |
| Package Length (Inches) | 0.780 |
| Package Length (mm) | 19.81 |
| Package Width (Inches) | 0.770 |
| Package Width (mm) | 19.56 |
| Turns Ratio RX | 1CT:1CT |
| Turns Ratio TX | 1CT:1CT |
Electrical Specifications (25):
1. Turns Ratio50KHz, 0.5V
Chip side: Line side=1CT: 1CT+_2%
2. Inductance (Ls) 100KHz, 0.1V, 12mA DC Bias:
Chip side: 350uH Min
3. Insertion Loss1-100MHz: -1.4dB Max
4. Return Loss1-30MHz: -16dB Min
40MHz: -14.4dB Min
50MHz: -13.1dB Min
60-80MHz: -12dB Min
100MHz: -10dB Min
5. Differential to Common Mode Rejection:
30MHz: -45dB Min
60MHz: -40dB Min
100MHz: -35dB Min
6. Crosstalk30MHz: -40dB Min
60MHz: -35dB Min
100MHz: -30dB Min
7. Hi-Pot: 1500Vrms, 0.5mA, 1Sec
Chip side to Line side
Applications
Used for networking and communication equipments such as HUB, PC
card,
Switch, Router, PC Mainboard, SDH, PDH, IP Phone, xDSL modem
LP5019NL 1000Base-T Low Profile Ethernet Magnetic Transformers
Gigabit Network
