0.8mm Tpu Bubble Zorb , Zorb Bubble , For Commercial Used In Grass
Bumper Balls are air-tight, heat-sealed inflatable products made
from PVC or TPU.
There are three size: 1.2m(for children), 1.5m&1.8m(for
adults).
Users can strap on the Bumper Ball and 'bump' into each other, much
like a Sumo Wrestler game.
Bumper Ball competitors can run into each other, roll on the
ground,
and even jump on each other using the Bumper Ball inflatable.
It is suitable for family backyard, playing center, etc.
Specification
| Name: | 0.8mm Tpu Bubble Zorb , Zorb Bubble , For Commercial Used In Grass |
| Brand: | Asia inflatable |
| Size: | 1.5m |
| Material: | 0.8mmTPU |
| Colors: | Clear(Transparent) |
| Package: | PVC Tarpaulin Bag + Weaving Bag. (double package) |
| Package size: | 62x45x20cm |
| Package Weight: | 15kg |
| Delivery Way: | By Express, By Air or By Sea |
| Delivery time: | According to your requirements |
| MOQ: | 1pc |
| Price: | 100USD to 240USD |
| Payment : | T/T, PayPal,Western Union or Cash |
| Useage: | Grass, Beach, Snow, Water Pool etc. |
| Accessories: | CE/UL Inflatable Pump |
| Repair Kits: | Included, TPU/PVC Material, Glue. ect. |
Maintain & Storage:
1 Disinfect and clean the ball regularly.
2 Check the ball before using. Any damage, please mend it with our
repairing kit and glue.
3 After use, please remove sundries outside and inside the ball.
4 Before packing, make sure the ball is clean and dry.Then store it
in cool and dry place.
How to Repair it?
5 Find out exactly where the leak is. Fill a spray bottle with a
mixture of soap and water and spray it liberally on the bumper ball
along the seams.
You will notice that the solution starts to bubble up where the
leak is located, so take note of the position os the hole.
6 Prepare the hole for patching.
Dry the seam off, and make sure that it is completely deflated
before attempting to patch the seam. If you have the patch kit that
came with the bumper ball,
you can use the prep solution to thoroughly clean the rubber before
proceeding.
Rubbing alcohol also works.
7 Apply plumber's goop liberally to the seam and let it dry for
about 15minutes. If possible, apply some goop to the inside of the
seam as well, so that it spreads out and gives an extra layer of
protection when the bumper ball pressurizes.
8 Fill the bumper ball about halfway with air and wait another
30minutes or so to make sure that the goop has dried completely.
9. Inflate the item completely and spray it again with the soap and
water mixture to make sure that the hole is indeed fixed.
