PE / PP Sweage Plastic Pipe Extrusion Line High Speed PLC Control
Quick detail:
Material: PE
control: PLC
Screw type: single screw
Process type: extruding machine
field;agricultural and constructional plumbing, water supply and
drain etc
Description:
This production line configuration polyolefin special single screw
extruder, a high-speed extrusion, efficient
speed change wait for a characteristic. Special mixed refine
separated type screw and spiral structure
reasonable, pipe flow nose, smooth outer wall and inner wall.
Special design of the sizing cooling way:
production, range φ50 - φ200mm,production speed up to 0.6 meters -
1.5 meters/points.
1. Product modeling is special thread form, may be bent freely
around obstructions, convenient
construction.
2. Product special thread form physical modelling, make its
compressive strength, in underground won't
because of stress and deformation.
3. Product acid, salt, alkaline can is admirable, long service
life.
4. The product has strong impact resistance, flexible and high
strength, even an earthquake or the ground
sinks etc variation is also quite safe.
Comprehensive above advantages, its construction fast, short
construction period, interface, and have
higher less economic benefits.
Applications:
Widely used in hot and cold water supply system, pure water system,
gas transmission, electric wire and
cable tube etc, has the very good market prospect and investment
value
Specifications
Model/Spec. | Diameter range (mm) | Extruder model | Line speed (m/min) | Max. Capacity (kg/h) | Installed power (KW) |
LPSG110 | 50-110 | LSJ65/30 | 0.5-2m/min | 100 | 50 |
LPSG200 | 75-200 | LSJ90/30 | 0.5-2 m/min | 140 | 80 |
Competitive Advantage:
1Steady performance
2competitive quotation
3Long using life
4High output
