Claw Machine Kit Hexapod Robot , Diy Robot Kit 20DOF
Description:
The new 20 -DOF hexapod robot , the perfect combination of
mechanical and robotic claws together, making the function more
powerful six -legged robot ! Can be used for teaching, research or
contests .
Our torso shell and a leg brace , all madeof hard aluminum alloy
material 3mm thickness 2mm aluminum other part is hard , we do not
have to worry about the strength of the robot stand ! This section
robot shape beautiful looking, but also very durable.
For the convenience of our customers, we have installed a robot
shell above the long hole square hole and install the controller
switches to facilitate the switch and controller mounted on the
robot !
This section hexapod robot a total of 20 degrees of freedom. Single
leg straight about 23cm, torso shell length 17.5cm, width is
15.5cm. Each robot leg has three joints, can be done forward,
backward , turning, dancing , climbing and other kinds of actions.
With two degrees of freedom robot with a mechanical claw that can
swing up and down , to gripping objects. The kit of parts , where
the purchase and installation drawings were sent to the exclusive
learning materials, easy to install and learn robots.
This section kits , we have installed for all the metal structural
parts , including brackets, bearings, screws and studs , do not
leave out some parts due to worry about .
Package list :
Multifunction Bracket *13pcs
foot thigh *6pcs
leg *6pcs
The main trunk of the upper case *1set
The main trunk of the lower case *1set
Short U Bracket *1pc
L Bracket *1pc
Bushing bearing *7pcs
Alloy mechanical claw *1pc
Pillars supporting the screw nut *1 set
Metal rudder plate *20pcs ( optional)
Not assembled
Competitive Advantage:
1. Convenient & Friendly Customer Service
2. Low Prices Direct From Factory Suppliers
3. Fast Delivery Around the World.
4. High Quality With Global Standards.
5. 1 Year Factory Warranty
6. Safe Shipping Way and Payment
