Customized 3.7V Lithium Polymer Battery Pack 500mAh For E-bike

Customized Polymer Li-Ion Battery pack3.7V 500mAh- UN Approved (NDGR)
Chemistry: 1pc of 3.7V polymer li-ion single cell LP583035-1S1P(UN Approved)
Capacity: 500mAh
Cycle life:≥500times
Accessory: 1x4.0A PCM; 1x 10K thermistor; 1x Molex connector-51021 3P
Charge voltage :4.2V±0.03V
Standard charge rate: 500mA (0.5C rate)
Max charge rate: 500mA (1.0C rate)
Max continuous discharge rate: 500mA (1.0C rate)
Peak pulse discharge rate: 1.5A (3.0C rate)
Size (TxWxL):5.8mmx31.0mmx36.5mm
Weight: approx. 9.8±0.5g
Storage:shall be storied within -10~60Celsius degree range environmental condition .
Temperature:23±5Celsius degree Humidity :65±20%RH

1. Brand : Melasta
2. Certisficate:CE,ROHS ,KC .
   Smart Tip:
   Please use MELASTA smart charger below to fully charge this battery pack
   M3P10-L1016 Smart Charger (0.5A) model for 3.7 V Li-Ion battery Pack
   Polymer Li-Ion battery may cause fire if misusing. We are not responsible for any damages or losses caused by misusing (included but not limited to: improperly charging/discharging, any changes of this battery pack, disassembling battery packs).
   Always charge battery with attention.Battery pack shall be placed on a fire-proof place to avoid any accident
   Please check battery polarity before connect to device
   Please read more safety warning about MELASTA polymer Li-ion battery
3. Prohibition of disassembly .
4. Prohibition of dumping of cells into fire .
5. Prohibition of cell immersion into liquid such as water .
6. The battery replacement shall be done only by either cells supplier or device supplier and never be done by the user.
7. Prohibition of use of damaged cell .