- Video, audio, data, contact closure, Ethernet and telephone
transmission can be achieved by one device to save much cost on
purchasing, much energy and time on management.
- 10-bit digital encoded technology and lossless broadcast quality
transmission
- Automatically compatible with PAL/NTSC/SECAM video formats
- Protocols of RS-232, RS422, RS-485 are applied.
- Non-compression and non-distortion signal and real-time
transmission to achieve high quality signal transmission solution
- Modularization structure, industrial-grade design, SMT craft and
good power supply ensure stable performance for 105hours with fault-free
- No adjustment and easy management due to plug-and-play design, as
well as feature of hot-swap
- LED status indicators offer right diagnostics of the system
operating condition.
- All interface with excellent thunder and lightning protection
- Stand-alone type and card-type installed in 19’’ 2U or 4U
rack-mounted chassis for centralized management
Specification
Video
Non-compression and no-distortion
Video standards: PAL/NTSC/SECAM
Frequency Response: 8MHz
Video connection: BNC
Signal to Noise Ratio: > 65dB
Optical
Optic wavelength: 1310/1550nm
Optic interface: FC/SC/ST(optional)
Supported: single mode: 9/125, multi mode: 50,62.5/125
Path Loss: 20dBm
Audio
Audio width: 20Hz～20KHz
Signal to Noise Ratio: > 85dB
Data
Data interface: RS-232, RS422 (full duplex), RS485 (half duplex)
Manchester, Biphase
Data rate per channel: Up to 512kb/s
BER: <10-9
Ethernet
Interface: RJ-45
Transmission rate: self-adaptive 10/100M or 10/100/1000M
Operation mode: half /full duplex
Telephone
Interface: RJ-11 Width: 8 kHz
Operation mode: Point to point hotline, program-controlled exchange
mode
Distortion: <1%
Signal to noise ratio :< 95dB
General
power supply: DC5V/1A( optional)
operating temperature: -35℃～70℃
operating humidity:0～95%
