Carbon Steel Pipe Straightening And Cutting Machine 22 * 2 KW With 600 Mpa High Speed

Carbon Steel pipe straightening machine 22 × 2 KW With 600 Mpa High Speed Machines

Quick Detail:

1. Type: Straightenner machine

2. Model Number: GJ80

3 Used in: the field of Carbon pipes,Non-ferrous metal pipes,and so on.

Description:

Introduction of the straightening machine

Straightening machines have been built with various methods of driving the rolls. Some machines have a separate drive motor for each roll, whereas the majority of modern machines usually use 2 drive motors, one motor for the top set of rolls and one for the bottom rolls. Regardless of the way the rolls are driven it is important that all rolls revolve at the same speed within about 1 to 2 rpm at maximum machine speed. In addition it is usual for the manufacture to build in an electronic load sharing system to ensure that the power needed to straighten is shared equally between the driving motors. Each time the rolls are changed a check of roll rpm and motor loading should be carried out.
If the rolls are not revolving at highly similar speeds, under load, tube straightness will be poor, roll wear will be rapid and under high straightening loads the motors may run out of power and stall.

Specifications:

Certification:

    In 2001,we set up our company,Hengli.

    Zhangjiagang Hengli Technology Co.,Ltd is specialized in developing and producing  LG series and LD series cold pilger mill, straightener machine, cold drawing machine and so on.

    Cold pilger mill is our main product.We self-designed and manufactured LG30,LG60,LG90,LG120,LG180 and LG250 type series of cold pilger mill in 2003,and developed LG30HGL high-speed rolling mill (160 times/min) in domestic in 2010,so filled the domestic blank. In 20011, we developed LG10H, LG20H, LG40H, LG50H series cold pilger mills, which all adopted the leading, Rexroth servo motor control system in domestic area, and realized full automation of continuous feeding and rolling. In 2012, we developed the planet form super speed cold pilger mill LG20 and LG15 whose designed stroke is 220 times/min. Then successively developed  LG 30H, LG50H cold pilger mill with crank-shaft balance system (max stroke is 180 times/min), for old and new customers to choose. At present, we are planning to continue developing LG350, LG420 type cold pilger mill, and other specifications. 

   We win the trust from the customers by means of high quality and perfect service. The products sell both home and abroad. some products are exported to the countries in South Korea,Russia, India, Mexico,Turkey and other regions.

　We stick to firmly establish the idea that "quality first. reputation highest". We provide the excellent products、good reputation and professional service with our full enthusiasm and sincerely cooperation. It is admired as contant keeping and promising enterprise in Suzhou.

   Warmly welcome to our company for visit and instruction from home and abroad.