Outdoor 30 core fiber optic cabling G.652D G.657A buried cable with
polyethylene sheath
Quick Detail:
- GYTS53 Fiber Optic Cable
- G.652D or G.657A
- Cable Diameter 2~30 core: 13.5 mm
- Tensile Strength Long/Short Term: 1000/3000N
- Crush Resistance Long/Short Term: 1000/3000 N/100m
- Bending Radius Static/Dynamic: 10D/20D
- GYTS53 cable complies with Standard YD/T 901-2001as well as IEC
60794-1.
Description:
The fibers, 250μm, are positioned in a loose tube made of a high
modulus plastic. The tubes are filled with a water-resistant
filling compound. A steel wire, sometimes sheathed with
polyethylene (PE) for cable with high fiber count, locates in the
center of core as a metallic strength member. Tubes (and fillers)
are stranded around the strength member into a compact and circular
cable core. An PSP is applied around the cable core. which is
filled with the filling compound to protect it from water ingress.
Then the cable core is covered with a thin PE inner sheath. After
the PSP is longitudinally applied over the inner sheath, the cable
is completed with a PE outer sheath.
Applications:
- Adopted to Outdoor distribution.
- Suitable for aerial duct and buried method.
- Long distance and local area network communication.
KT3008 GYTS53 Outdoor Fiber Optic Cable
G.652D or G.657A 2~30 Core PE Jacket |
|
| Description&Standards : |
The fibers, 250μm, are positioned in a loose tube made of a high
modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed
with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic strength
member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. An PSP
is applied around the cable core. which is filled with the filling compound to protect it from water
ingress. Then the cable core is covered with a thin PE inner sheath. After the PSP is longitudinally applied over the
inner sheath, the cable is completed with a PE outer sheath. |
|
|
| GYTS53 cable complies with Standard YD/T 901-2001as well as IEC
60794-1. |
| Characteristics: |
| Good mechanical and temperature performance; |
| High strength loose tube that is hydrolysis resistant; |
| Special tube filling compound ensure a critical protection fiber; |
| Crush resistance and flexibility; |
| PE sheath protects cable from ultraviolet radiation; |
| The following measures are taken to ensure the cable watertight: |
| (1)Steel wire used as the central strength member; |
| (2)Loose tube filling compound; |
| (3)100% cable core filling; |
| (4)PSP enhancing moisture-proof; |
| (5)Water-blocking material. |
|
| Technical Parameters: |
| Cable Type | Cable Diameter
(mm) | Cable Weight
(kg/km) | Tensile Strength
Long/Short Term
(N) | Crush Resistance
Long/ Short Term
(N/100mm) | Bending Radius
Static/ Dynamic
(mm) |
| GYTS53-2~6 | 13.5 | 230 | 1000/3000 | 1000/3000 | 10D/20D |
| GYTS53-8~12 | 13.5 | 230 | 1000/3000 | 1000/3000 | 10D/20D |
| GYTS53-14~18 | 13.5 | 230 | 1000/3000 | 1000/3000 | 10D/20D |
| GYTS53-20~24 | 13.5 | 230 | 1000/3000 | 1000/3000 | 10D/20D |
| GYTS53-26~30 | 13.5 | 230 | 1000/3000 | 1000/3000 | 10D/20D |
|
| Optical fiber Characteristics: |
| | G.652 | G.655 | 50/125μm | 62.5/125μm |
Attenuation
(+20℃) | @850nm | | | ≤3.0 dB/km | ≤3.0 dB/km |
| @1300nm | | | ≤1.0 dB/km | ≤1.0 dB/km |
| @1310nm | ≤0.36
dB/km | ≤0.40
dB/km | | |
| @1550nm | ≤0.22
dB/km | ≤0.23
dB/km | | |
| Bandwidth (Class A) | @850nm | | | ≥500 MHz·km | ≥200 MHz·km |
| @1300nm | | | ≥1000 MHz·km | ≥600 MHz·km |
| Numerical Aperture | | | 0.200±0.015 NA | 0.275±0.015NA |
| Cable Cut-off Wavelength λcc | ≤1260nm | ≤1480nm | | |
| Storage/Operating Temperature : -40℃ to + 70℃ |
| Order Informations: |
| Marking | KINGTONE KT3008 GYTS53 XXX M/FT (or Per customer's request) |
| Package | 1000M/2000M/3000M, Drum/Pallet (or Per customer's request) |
| Delivery time | Normally 15 days after received the deposit. |
Competitive Advantage:
1, From raw materials to final products, we perform intense quality
checks to maintain our product quality:
A,Incoming material inspected by QC.
B,Manufacturing Process Control
A: Manufacturing procedure
B: Workers trained daily/weekly/monthly
C: Work instructions manual at each work station
D:5S system implemented
E: Machine maintenance procedure
C, Quality Control and Final Inspection
The QC staff will check the material, process product and final
product according to the specification or test procedure.
2,Our R&D efforts center on reinforcing and developing element
technologies needed to support the future growth and success for
customers and KINGTONE
3,We know customers have urgent needs. We are skilled at effective
communication to interact with customers.In order to provide prompt
service, we can answer for you 7*24 hours.
4, We can Quickly and professionally answer for the inquire
5, More than 1000 kinds of cable, connectors and assembles can be
produce and organized from us
6, Intime delivery
