3 in 1 H-beam Production Line H beam steel assemble / Welding
Quick Detail:
PHJ-series H-beam fabrication machine is a highly efficient
equipment for manufacturing welding-structure H-beam, which can
finish the job of accurate “I”-shape assembly,SAW,flange
straighting of light-duty H-beam with the weld-toe below 8mm.This
equipment has the merit of compact appearance while integrating the
function of assembly,welding and straightening,so as to leaving out
transfer of workpiece among different process, which is a
cost-efficient equipment of good technology.
Description:
There are 3 sets of manipulator among input conveyors of the
equipment, for rough aligning and positioning of flange and web.
When sheets are hoisted onto the equipment, these manipulators can
support the sheets and align them, preventing the sheets from
dumping, making operation safe and reliable.
There are 2 sets of positioning units for flange and web each, with
the positioning style of one side lead-screw, the other side
hydraulic cylinder, making accurate positioning of the work-piece.
The lead-screw positioning units(2 for flange, 2 for web) are joint
together thru coupling shaft of reducer, guaranteeing in-phase
working of the units, as well as simple and quick adjustment for
different size of H-beam.
After web and flange are sent into the equipment, the tail aligning
unit will be raised automatically, making sure alignment of face of
flanges and web.
Applications:
2 sets of U.S. LINCOLN DC-1000 SAW system are used for welding the
2 seams alongside both sides of H-beam, of twin-arc fashion
(TWIN,Ø1.6 wire), featuring in high efficiency and good quality.
Position of welding torch can be adjusted and observed easily
during welding.
2 sets of automatic flux recycling system are used for conveying
flux to the welding seam and screening and recycling un-sintered
flux by way of the suction hole at the rear side of torch, and
sucking the flux back into flux barrel for re-use.
Deformation happens at the flanges post welding. For this reason, 1
set of flange straightening unit is equiped at the output side of
the equipment. It is mechanic down-stroke style, of strong force
and easy control.
Specifications:
If you do not see anything that matches your requirements please
contact us to discuss your needs further.
No. | Parameters | PHJ15 |
1 | Flange thickness T | 6-32mm |
2 | Flange width B | 200-800mm |
3 | Web thickness A | 6-25mm |
4 | Web width H | 300-1500mm |
5 | H-beam length L | 4000-12000mm |
Competitive Advantage:
- The complete equipment is controlled with PLC.
- High efficiency;
- Save space;
- Easy for operation.
- 3 functions in one machine.
