YMC251 Horizontal Bevel Edge Grinding Machine
YMC251 -8 Spindles Horizontal Glass Beveling Machine is a new glass
processing equipment, which changes the traditional glass vertical
chain of transmission. It uses level transmission timing belts to
improve the grinding accuracy. It includes five systems: the
control system, the grinding system, the nip&transmission
system, the cooling system and the up system. The whole structure
is tight, the exterior is harmony and unity. The control system:
Using double- sided meter dials, in order to monitor the operation
of machine, voltage and current instructions on both sides to
ensure the unusual situation discovered and resolved promptly. The
grinding system: using high-speed and three-phase exchange
electrical motor whose design life is 20 years to ensure the
machine consistent stability in the long-term use. Grinding wheels
use international pop techniques, ensuring the accuracy and
polishing brightness achieving to the mirror effect. The
nip&transmission system: choosing single whirlpool, double
whirlpool, and shift exchange frequency conversion governor in the
course of operation to make speed in a smooth transmission from 0
to 4m to meet the requirement of different processes. The nip parts
use imported timing belts with red plastic and material PU on its
surface, which reduces the glass broken rate in the process of
transmission. At the same time, it can also keep nip power between
glass and timing belts enough so that glass doesn’t slip with
timing belt to make the product achieve the precision requirement.
The cooling system: adopting circulating water, double-pump and
double water boxes to cool, and add cerium oxide polishing power in
one box, to guarantee the circulating cooling water enough, and
also guarantee the glass polish. The carrying on system: using
timing belt carry-on rack which moves together with the nip cane
location to reduce the large glass’surface scratch rate. The
machine can be used in grinding flat glass’linear beveling edge
with the angle scope from 5° to 30°. Rough grinding, fine grinding
and polishing will be finished at one time and it can reach the
mirror effect. Its smallest processing size is 4cm×4cm, filling the
gaps of the international market. It is the best equipment for the
glass deep processing enterprises.
2.MAIN TECHNICAL PARAMETER:
Size of Machine 4160*1600*1800mm
Glass thickness 3-20mm
mini workable size 30*30mm
speed 0-4m/min
Angle 5-35 degree
Power 16.2kw
Total Weight 3200kg
The entire machine structure includes:the control system,the
grinding system,the transmission system,the continues system and
cooling system
