Integrated Drone UAV Radar Tracking Radio Detection Identification and Defense System for Military use

EST-GSM DCS Dual band Mobile Phone Signal Repeater/Amplifier/Booster

Integrated Drone UAV Radar Tracking Radio Detection Identification and Defense System for Military use

1. Summary

UAV-J2020 is a special system for UAV detection and interference integrated through the detection and certification of the Security and Police Electronic Product Quality Inspection Center of the Ministry of Public Security. The system is used for UAV detection, identification and interference. The system integrates collaborative spectrum perception and deep neural network. Through radio detection technology, the characteristic signal, big data processing, artificial intelligence and machine learning to realize effective detection, identification and orientation tracking of low-altitude UAV in the defense area. The system realizes the low-altitude three-dimensional protection of the defense area within a radius of more than 5,000 meters, which has been widely used in government organs, prison guards, airlines and airports, military restricted areas, major activities and other fields.

2. System Function

The operating terminal is a core system with six functions: automatic detection, counter transmission, signal recording, equipment connection status display, system setting and system shutdown. Realize the multi-target intrusion alarm, target identification and positioning, display target movement track and flight control hand position display function.

3.1 Detect Interface

The system detection range covers 50 MHz-6GHz, and detects the own map transmission autonomous learning.

The following will explain the functions in sequence according to the numerical order of the interface:

1. Start: Detect drones.

2. Stop: Stop detection.

3. Setting: Antenna, detection frequency band, network, etc. can be set; (cannot be set during detection)

4. Unattended: Once the drone is detected after activation, it will automatically jamming.

5. Offline Maps: Switching between offline and online maps.

6. Roof Strong Interference Mode: In complex electromagnetic environments, such as on the roofs of many buildings, activating this function can increase the detection distance.

7. Complex Electromagnetic Environment: Used in complex electromagnetic environments.

8. Detection Method: Selectable frequency band group scanning or single frequency scanning

9. Artificial Level: If you have certain radio knowledge, you can identify targets in complex electromagnetic environments based on level setting parameters

10. Jamming: Enter the reverse control interface.

11. Browsing History: browsing history.

12. Export Detection Results: Export detection results in the form of a table.

13. Playback of Drone History Trajectory: This function can depict the flight trajectory of a drone by selecting the number on the left side of the detection result list with the mouse.

14. Clear Detection Result Database: Clear the detection results.

15. Detection Results

16. Remote Control Detection Results

17. White List: Clicking on the serial number in the drone detection result will result in the option of whether to whitelist this drone. If it is whitelisted, it will not be jamming.

3.2 Interference the Emission Interface

The UAV interference of the system suppresses the remote control signal and map transmission signal of the UAV through directional electromagnetic interference, so that the UAV loses the remote control of the remote control, so as to realize the return or crash landing. Through the integration of detection data and control strategy, the system automatically points to the detected target orientation and counterattack band interference with the UAV. The countermeasure performance can be improved by 4-6 times, while the equipment can avoid interference to normal WIFI and other communications, and avoid accidental damage to the whitelist aircraft in specific frequency bands and specific angles.

3.3 Signal Recording Interface

UAV detection and interference system is the only open to the customer drone signal characteristic recording, for a new type of drones, can choose figure or jump frequency signal recording, figure signal recording, start recording after double click the drone spectrum map frequency, and adjust the gain and reference level, record storage can identify the model.

3.4 System Setting Interface

The setting system of UAV detection and jamming system includes five functions: antenna setting, detection and frequency band setting, eliminating detection and alarm frequency band setting, network setting and software and database update.

3.4.1 Antenna Setting

According to the geographical situation of the detection, if the back is a mountain or a tall building, the Angle range of protection can be set arbitrarily, which can effectively eliminate the false azimuth Angle caused by signal reflection.

3.4.2 Detecting Frequency Band

The detection frequency band range of the UAV detection and interference system covers 50MHz-6GHz, and the antenna coverage frequency band is 380 MHz-6GHz. Autonomous learning of image transmission signal, WIFI recognition, frequency hopping signal AI intelligent learning, 2.4G/5.8G frequency band autonomous learning and single frequency band autonomous learning, so as to realize the identification and detection of unknown UAV outside the database.

3.4.3 Eliminate the Function of Detection and Alarm Frequency Band

When the system self-study function is started, there may be some false positives. In the system setting, it can be set to eliminate the alarm band, such as mobile communication band, radio and TV band.

3.4.4 Network Settings

3.4.5 Software and Database Update

3.5 Advanced Features

3.5.1 Side Function of Arbitrary Signals

The system has the lateral function of any signal. In the detection of the detection interface, double-click the desired lateral frequency in the spectrum diagram to exit the lateral direction and approximate distance of this frequency. For special signals, this function can be used for lateral determination.

After stopping the detection, the lateral function of this signal is canceled by itself.

3.5.2 Autonomous Learning Function of Frequency Hopping Signal

For autonomous learning jump frequency signal, in the process of detection, after the environment stable [detection after a period of time] can press the right button in the detection results bar to eliminate the flying drone jump frequency signal alarm, the other unmanned aircraft jump frequency signal alarm will be eliminated, if there is illegal jump frequency unmanned aircraft, will be real alarm.

After the detection is stopped, the alarm elimination function of the frequency hopping signal is canceled by itself.

3. System Parameter

The main technical parameters of the UAV detection and jamming system are shown in the following table:

Detection	Frequency Range	50MHz ~6GHz
	Detection Radius	5000m (depending on the working condition)
	Real-time Broadband Processing	160MHz
	Ranging Accuracy	≤10%R
	Horizontal Extent	0-360°
Jamming	Frequency Band 1	(895~935) ± 5 MHz / 25W
	Frequency Band 2	(1165~1285) ± 5 MHz / 10W (PRO version optional)
	Frequency Band 3	(1555~1635) ± 5 MHz / 10W
	Frequency Band 4	(2395~2505) ± 5 MHz / 25W*2
	Frequency Band 5	(5130~5395) ± 5 MHz / 50W (PRO version optional)
	Frequency Band 6	(5730~5865) ± 5 MHz / 25W*2
	Frequency Band 7	(433) (PRO version is optional)
	Shielding Distance	1000m-2000m
	Response Time	≤3s
Operating System	White List	possess
	Unattended Operation	possess
	Data Storage, Historical Track Playback	possess
	Signal Recording	possess
	Mono Station Locating	possess
	Sound and Light Alarm Function	possess
Tractor Parameter	Levels of Protection	Level IP65
	Size	=500mm, H=500mm
	Weight	15KG
	Maximum Power Dissipation	Detection 60W; band countermeasures <750W
	Working Temperature	-30°-60°

Estlonda founded in 2003, its predecessor was Longhua Estlonda Electronics Factory in Baoan District, Shenzhen. It’s a national high-tech enterprise which is engaged in the research and development, production and sales of wireless communication equipment. We are also the strategic partner in the field of 5G private network and 5G multi-functional smart pole wireless communication for State Information Center (National E-Government External Network Management Center). Also as a certified enterprise by the Ministry of Industry and Information Technology and the National Radio Commission, and the vice president company of Guangdong High-Tech Industry Chamber, Emergency Governance Society of Shenzhen and Shenzhen Smart Street Light Association.

We are mainly focused on the R&D and manufacturing of 5G mobile phone signal jammers, 5G base station, 5G gateways, 5G core network, 5G private network, 5G public network blind filling and other communication equipment, as well as a 5G multifunctional smart pole solution provider. As the first and largest manufacturer in China to produce mobile phone signal jammers, we are with a market share more than 80%. The Chinese headquarters is located in Longhua District, Shenzhen, and the foreign headquarters is in Hannover, Germany. There are two R&D centers in Nanshan, Shenzhen and Nanjing, Jiangsu. Our R&D team is mainly composed of outstanding R&D personnel in communications from Silicon Valley in the United States and major semiconductor universities in Belgium.

With 5G technology and product research and development as the core, and relies on the 5G+ multifunctional smart pole industry foundation to build smart cities, smart campuses, smart parks, smart scenic spots, smart emergency, smart roads, smart ports, smart mines, smart ports, smart factories, smart terminals, and etc., we provide research and development, production of 5G core network, 5G base station, 5G gateway and other private network communication equipment, and 5G global private network solutions, provide 5G private network services for digital factories, digital parks, digital governments, and digital China, to solve the communication and interconnection problems in various places without communication methods and network signals.

As a leading wireless communication equipment manufacturer and solution provider, our products and solutions have been widely used in schools, prisons, troops, conferences, confidentiality, enterprises, finance, electricity, coal mines, public security, hospitals, ports, government agencies, transportation systems and other fields, in the same track with Huawei and ZTE. It has participated in the formulation of national standards many times, obtained a number of patents and soft works, and has passed the ISO9001 international quality management system. It is a qualified supplier of China Mobile Communications.

In addition to in-depth cooperation with China's four major carriers, central enterprises, and state-owned enterprises, we also participates in the testing and construction of 5G public networks of telecom operators in Hong Kong Telecom, Brunei, Palau, Southeast Asia and other countries. In the future, we will also cooperate with partners to participate in overseas operators testing and construction of 5G communication network.