Integrated Magnetic RJ45 PCB Connector Tab Down Telecom Connectors
Material specifications:
- Plastic core:Glass fiber filler PBT Black(UL94V-0)
- Contact:gold pin0.35mm thick phos bronze plated nickel then with
6u’ gold
- PCB Terminal:Phosphor bronze ,Tail-Tin over Nickl
- Housing:Phenolic, PBT Black (UL94V-0)
- Metal shell:Copper Alloy ,Tin and Nickel plated
ELECTRICAL SPECIFICATIONS @25℃ |
| 2.1 OCL :P(1-2)=P(3-6)=350 uH Min. @ 100 KHz, 100mV,with 8 mA DC
Bias . |
2.2 L.L:P(1-2)=P(3-6)= 0.5uH Max. @ 100 KHz, 100mV |
2.3 Cw/w: 35PF Max. @ 100 KHz, 100mV |
2.4 Turn Ratio : P(1-2):J(1-2)=1CT:1CT±3% |
P(3-6):J(3-6)=1CT:1CT±3% |
2.5 DCR : 1.2Ω MAX. |
J(1-3):J(2-6)=J(4-7)=J(8-6)=150Ω |
2.6 Polarity: P1&J1;P3&J3 In-Phase. |
2.7 Insertion Loss :-1.1dB Max @0.3~100MHz |
2.8 Return Loss : -16 dB MIN @1-30 MHz |
-14.4 dB MIN @40MHz |
-13.1 dB MIN @50MHz |
-12 dB MIN @60-80MHz |
2.9 Cross Talk : -35 dB MIN. @1~100 MHz |
2.10 DCMR : -25 dB MIN. @1~100 MHz |
2.11Isolation HI-POT: P(1-2-3-4-5-6-7-8) TO
J(1-2-3-6-4-5-7-8)@1500Vrms/ |
1mA Max/ 2SEC. |
Applications:
Integrated RJ45 connector main used to :
• 10/100M net card,PCMCIA net card,USB Hub,network
switch,router,fiber optic transceivers,optical transceiver,IP
phone, internet set-top box,internet camera,net
bridge,computer,telecommunication,MODEM,HomePNA,DSL／ADSL and so on.
led optional
Descrition:
RJ45 ,in order to keep good touch between gold finger and crystal
head,should paint the gold on the surface,
there is 6u,15u,30,50u,usually use 6u,according to customer’s
request and cost to proceed,
gold finger insert and pull life should be 750 times above
| 1.1 RJ-45 connector integrated with X'FMR/ Impedance Resistor/High |
Voltage Capacitor. |
1.2 Size same as RJ-45 connector to save PCB board space. |
1.3 Design for 10/100base transmission over UTP-5 CABLE. |
1.4 Operating temperature range is 0℃~70℃. |
