Digital Display 9V 5HZ - 10KHz Low Frequency Pocket Vibration Meter
HG-6500BL
Description:
Vibrimeter, also known as seismograph vibration analyzer or pen, is
designed by using the piezoelectric effect of quartz crystal and
artificially polarized ceramic (PZT). It is widely used in
machinery manufacturing, electric power, metallurgy vehicles and
other fields.
In order to realize the modernization of equipment management, the
factory should actively carry out advanced equipment management
methods and adopt equipment maintenance technology based on
equipment condition monitoring. Equipment condition monitoring and
fault diagnosis are the premise of equipment preventive
maintenance. Especially heavy industry enterprises, work continuity
and high safety and reliability requirements, through the condition
monitoring.
HG-6500BL Low frequency pocket vibration instrument, mainly used in
machinery and equipment vibration displacement, velocity
(intensity) and the acceleration, temperature parameters of the
measurement instrument in the bearing housing using the measured
data, the control of international standard ISO2372 , Or the use of
enterprises, the standard machine, you can determine the equipment
(fans, pumps, compressors, motors, etc.) in which the current state
(well, pay attention or dangerous, etc.).
Principle of vibration measurement:
Vibrimeter, also known as seismograph vibration analyzer or pen, is
designed by using the piezoelectric effect of quartz crystal and
artificially polarized ceramic (PZT). When quartz crystals or
artificially polarized ceramics are subjected to mechanical stress,
their surfaces generate electric charges. Using piezoelectric
acceleration sensor, the vibration signal is converted into
electrical signal, through processing and analysis of the input
signal, vibration acceleration, speed, displacement value is
displayed, and the corresponding measurement value can be printed
out by printer. The technical performance of the instrument is in
line with the international standard ISO2954 and the Chinese
national standard GB/T13824, for vibration intensity measurement
instrument, sine excitation method vibration standard requirements.
It is widely used in machinery manufacturing, electric power,
metallurgy vehicles and other fields.
Function:
Vibrometer is used to measure the vibration of equipment, mainly
refers to the vibration of rotating equipment and reciprocating
equipment. Intelligent vibration meter can get spectrum, envelope
and so on. A wireless vigrometer like this can store the
measurement results indefinitely for pre-maintenance, and judge
whether the equipment is in good condition by the value of these
vibrations, as well as the vibration spectrum, vibration waveform
and trend.
Specifications:
Sensors: one rotary shear accelerometer
Split charge amplifier built-in shear accelerometer
Range: Acceleration 0.1 ~ 199.9m/s2 (single peak) (5 or 10 ~ 1KHz;
1K ~ 10KHz)
Speed of 0.1 ~ 199.9mm / s (RMS) (5 or 10 ~ 1KHz)
Displacement of 0.001 ~ 1.999mm (peak) (5 or 10 ~ 1KHz)
Accuracy: 5% ± 2 vibration words
Display: LCD display three and a half
Maintain the characteristics: measurement value is automatically
maintained, automatic shutdown delay
Signal Output: AC 2V peak (full scale and the load is greater than
10K ohms)
Power: 9V laminated battery 1 can be used continuously 25 hours
Size: 185mm × 68mm × 30mm
Weight: 200g
Model | Low frequency and temperature | Function | Frequency range |
HG-6500AN | Standard (I) | Acceleration, Velocity, Displacement | 10Hz ~ 10KHz |
HG-6500AL | Low frequency (I) | Acceleration, Velocity, Displacement | 5Hz ~ 10KHz |
HG-6500ANC | Vibration and temperature(I) | Acceleration, Velocity, Displacement, Temperature | 10Hz ~ 10KHz |
HG-6500ALC | Low frequency and temperature(I) | Acceleration, Velocity, Displacement, Temperature | 5Hz ~ 10KHz |
HG-6500BN | Standard | Acceleration, Velocity, Displacement | 10Hz ~ 10KHz |
HG-6500BL | Low frequency | Acceleration, Velocity, Displacement | 5Hz ~ 10KHz |
HG-6500BNC | Vibration and temperature | Acceleration, Velocity, Displacement, Temperature | 10Hz ~ 10KHz |
HG-6500BLC | Low frequency and temperature | Acceleration, Velocity, Displacement, Temperature | 5Hz ~ 10KHz |
