MK9 Maker Cigarette Rolling Machine , HCF80 tray filler MAXS Plug
Assembler
This combination consists of three machines: MK9 cigarette maker, MAXS plug assembler and HCF80 tray filler. It can be customized to produce king size cigarettes, super slim
cigarettes or kreteks with different size. The cigarette weight can
be inspected,and the bad cigarettes can be rejected online
automatically. This type of combination has been sold to Asia,
Africa, Europe and North America, widely popular in the
international market.
Highlights:
1. The cigarette cutting system uses the double-knife
single-cutting system with lower-rise temperature and lower noise.
This gives the very good quality of the cigarette cut.
2. The complete suction system and high air pressure system .
3. The hopper system adopts AC servo motor to directly drive the
tobacco cutting system. The timing belts are used instead of the
gears, so the even tobacco-feeding is greatly improved and the
maintenance cost is reduced as well.
4. It adopts AC servo driving system that simplifies the mechanical
structures and reduces the failure and maintenance cost, and
improves the transmission precision.
5. Electric control system:
◆ control center: it adopts the SIEMENS PLC S7-300 series.
◆ weight controller: the microwave weight control system is adopted
to avoid any harm to people.
◆ man-machine interface: The SIEMENS touch screen provides friendly
man-machine interface, which displays the machine status and
production data precisely. It is also convenient to modify the
system parameter and check out the failure.
Main Parameters:
Output: 5000cig/min for the king size cigarettes | Frequency: 50Hz |
3500cig/min for the super slim cigarettes | Total power: 50KVA |
Cigarette parameter | Outside dimensions |
Filter-cigarette length: 65 ～110± 0.5 mm | Cigarette maker : 3630× 1270 × 1870mm |
Tobacco rod length: 55 ～90 mm | Plug assembler: 3340×1340× 1820mm |
Cigarette diameter: φ 5.4 ～φ 9.0 mm | Tray Filler : 2350×2400× 2100mm |
Power supply: 380V ± 10%(3phases) | Total weight: 8600kg |
Making Process Requirements:
1, Ambient conditions: Temperature: 20℃--30℃, Relative humidity: 62％--68％
2, Paper bobbin: Tensile strength ≥0.85KN/m, Extensibility ＞1.6％, Humidity: 6％±1.5％
Joint number ＜1/1000 m
3, Width: 48±0.3 mm, Thickness: 0.04mm～0.05 mm
4, Cut tobacco Grade: A, Humidity: 12.5％±0.5％
5, 5.5bar
6, Viscosity of VPA
For the maker: 2500mPa.s-5000mPa.s
For the assembler: 5000mPa.s-10000mPa.s
