Annular High Pressure 0.5 Mpa Gear Centrifugal Transfer Pumps for
Transporting Liquid
Product description:
NCB Series Inside Engaged Gear Pump is a volumetric pump for
transporting liquid, which has advanced structure and good
performance. This pump employs the inside engagement for gears, the
pitch circles of both inside and outside gear are at one side,
another side is separated by “swing link” on the pump cover and
forms up feeding and discharging chamber. The driving inside gear
on the main shaft drives the pinions to rotate in same direction,
in the feeding chamber, the gear teeth are separated each other,
this forms up negative pressure surface, so it sucks in liquid.
Gear teeth enter into the engagement surface continuously in the
discharging chamber and extrude liquid out.
Application:
It is applied to convey liquid from all kinds of light or
volatility to deep sticky, even to half-solid. It is widely used in
petroleum, chemistry, oil, paint etc.
Product competitive advantage:
The inner gearing principle is adopted for this pump. The annular
and external gear pitch circles closely lean against one side, the
other side is separated by covering with “ crescent plate” . The
annular gear driver the external gear for the same direction
rotation. It has the advanced structure, fine quality, small
volume, large flow, low noise, durable service life.
Product Specifications:
