Hydraulic Core Drill Rig For Mining ,Mineral exploration Drilling
Machine HYDX-4
Mineral exploration drilling rig HYDX-4 could substitute expensive famous products.
It could be applied to exploration and prospecting of mineral, geology, metallurgy, coal, petroleum, natural gas, groundwater and other industries.
I．Brief Introduction
The core drill rig of full hydraulic and rotator adopted the
technology of wire-line coring has been the dominant type rig for
solid mineral deposits prospecting in developed counties in the
world. It is also the developing direction of drilling technique
and drilling equipment in China. Under these circumstances,
SINOCOREDRILL has developed the HYDX-4 core drill rig successfully
according to the situation of China. This type of drill rig could
substitute imported products. It could be applied to exploration
and prospecting of geology, metallurgy, coal, petroleum, natural
gas, groundwater and other industries. The drill rig is equipped
with a series motor driving pump. The feeding and lifting of
rotator are driven in the structure of cylinder directly pushing,
with a 3.5m(11.5 feet) stroke.
The rotation of spindle is driven by a single engine. It has four
mechanical shifts of range of speeds, and the speed could be
adjusted hydraulicly with stepless change.
The rig is simple in structure. It is light and easy for
transference; the mast has the functions of sliding and touching
ground; the spindle lifted and lowered with hydraulic cylinder; it
could be folded for transport and relocation. The spindle hole is
in large diameter.
The core drill rig of full hydraulic and rotator adopted the
technology of wire-line coring has been the dominant type rig for solid mineral deposits prospecting in developed
counties in the world.
Main Parameters:
Diesel Engine | Model | Cummins 6BTA5.9-C180 (turbocharged and charge water cooled) |
Displacement | 5.9L (1.56 US Gallons) |
Power | 132Kw (180HP) |
Rated RPM
(Factory setting) | 2200rpm |
Drilling Capacity | BQ | 1000m(3280feet) |
NQ | 700m(2296 feet) |
HQ | 500m(1640 feet) |
Drill Head | Rotation Motor | Hydraulic Motor-variableMaker: SAUER-DANFOSS |
RPM | Four Shifts/ Stepless Change 0-1100 RPM |
Ratios | 1st 14.422:1
2nd 8.171:1
3rd 4.519:1
4th 2.652:1 |
Head Opener | Pivoting style, Manual actuated |
Hydraulic Chuck(PQ) | Hydraulically opened, Disc Spring Clamping, Normally C Closed Type
Axial Holding Capacity of 222400N |
Max. Torque | 4200 N·m(3098 lbf·ft) |
Hold Diameter | 98 mm(3.86 inch) |
Max. Lifting capacity of Spindle | 150 kN(33720 lbf) |
Max. Feeding Power | 60 kN(13480 lbf) |
Primary Pump | Hydraulic pump Axial Piston variable displacement Triplex pump for
driving of rotator, winch mud pump & leveling jacks.With load
sensing system. | Maker: DANFOSS
1st Pump:148LPM at 31.5MPa
2nd Pump:120LPM at 28MPa
3rd Pump:50 LPM at 16MPa |
Hydraulic Tank | Capacity | 310 L (82 US Gallons) |
Capacity of Main Hoist | Hoisting force (single wire) | 57kN(12814 lbf) (bare drum) |
Hoisting Speed (single wire) | 38-70m/min(bare drum) |
Steel Wire Diameter | 12 mm(0.473 inch) |
Steel Wire Length | 50 m(164 feet) |
Capacity of Wireline Hoist | Hoisting Force (single wire) | 1200 Kg(2646 lb) (bare drum) |
Hoisting Speed (single wire) | 60-90m/min (bare drum) |
Steel Wire Diameter | 6 mm(0.236 inch) |
Steel Wire Length | 1000 m(3280 feet) |
Mast | Mast Height | 11 m(36.09 feet) |
Mast Adjusting Angle | 0°—90° |
Drilling Angle | 45º off horizontal to 90ºvertical down |
Feed Pull | 15000kg(33075 lb) |
Feed Thrust | 6000kg(13230 lb) |
Rod Pull | 3m or 6m(9.84feet or 19.68feet) |
Feeding Stroke | 3500 mm(137.80 inch) |
Slippage Stroke | 600 mm(23.62 inch) |
Mud Pump | Type | Reciprocating pump Triplex Plunger |
Model | BW160/10 |
Stroke | 70mm(2.76 inch) |
Discharge pressure | 2.5, 4.0, 6.5, 10.0 Mpa
(363, 580, 943, 1450 psi) |
Foot Clamp | Clamping Scope | 55.5-110 mm(2.19-4.33 inch) through hole dia.154mm(6.06 inch) |
Others | Weight (platform type) | 9300 Kg(20506 lb) |
Dimensions (L×W×H) | 5100×2200×2890mm(200×86.6×113.78 inch) |
Transport Way | Crawler |
2. About us
We are one of the leading manufacturers of diamond core drilling
rigs in China ,
We produce and supply spindle type diamond core drilling rigs and
all hydraulic core drilling rigs with the drilling capacity from
100 meters to 4200meters, mud pumps and other related drilling
tools can be supplied as well.
We warmly welcome clients from all over the world to contact us for
any inquiry, and we will try our best to provide professional service to
satisfy you.
3. Service
Shipping time depends on the destination.
After we ship the goods, we will email you the shipping
information, as well as tracking details.
The goods will be delivered by the most reasonable way for
delivery.
4.Warranty and After-sales services:
1. All of our drilling rigs are provided warranty period and
after-sales services, pls contact us for details.
2. We offer lifer-long technical support to our drilling
equipments, please contact us freely if you have any question to
our drilling equipment you received, we will tell you how to solve
the problem by email or phone.
5.Feedback:
1. Therefore, your feedback is extremely important to us, please leave
good feedback to us if you get satisfied with our goods and service
2. We care about our valued customers, and will always try to help
you
6. Product view
