Product Description
Liquid Silicone, Molding Silicone, RTV-2 Silicone is a
two-component material, and the silicone rubber includes Part A
base silicone and Part B CA30 curing agent. The Part A base
silicone and Part B curing agent can cure at room temperature by a
condensation reaction.
Product Features
1. Good flow ability and long working time
2. Medium hardness
3. High tear and tensile strength
4. Easy de-mould from complex replica parts
5. Acid and alkali-resistance
6. Low linear shrinkage
Applications
A: Cultural relic duplication, architectural decoration, statues
B: Resin crafts
C: Lighting ornaments, candles
D: Plaster, Gypsum, Cement, Concrete decorations
F: Model design, product exploitation, etc.
Using Instruction
1-Take 100g of part A and add 2g of part B and mix the silicone
rubber and curing agent evenly.
2-vacuum pumping
Without exception, this step takes less than 10 minutes. Otherwise,
it will cause , and no more further steps will be available
3-Pouring mold or block mold of silicone rubber
The pouring way is an easy way to make molds, it's slowly and
evenly pour into the mixed silicon rubber into the square frame.
After the cross linking reaction.
Company Information
We are manufacturer, and specialized in manufacturing different
hardness, different viscosity silicone rubber series, we are
competitive in price with good quality.
Packaging & Shipping
Part A base silicone: 5kg, 20kg/drum, 25kg/drum or 200kg/drum
Part B CA30 Curing Agent: 250g, 800g/bottle, 1kg/bottle
Storage & Shelf life
When the silicone rubber is stored at or below 30 centi degree in
the original unopened containers, Silicone Base and Curing agent
have a usable life of 10 months from the date of production. After
10 months stockpiles use the Stir to mix the Part A silicone for
some minutes, then the silicone can be use again, no influence for
other performance.
