PVC Profile Extruding Machine Plastic Window Door Frames/ Ceiling
Board / Wallboard Production Line
Production Introduction
The production line is mainly based on various kinds of PVC as raw
materials, extrude raw materials with a twin screw extruder,
equipped with different sizes and shapes of molds, match with a
corresponding calibrating table or cooling tank, hauling machine,
cutting machine, and rack, can produce a variety of different
plastic profiles. We can customize the production line according to
customer samples.
This product can be used on skirting panel profile for ceiling,
wall panel, background wall, window frame, door frame, skirting
board, elevator door frame, etc. special for public and private
decoration, such as villa, house, hotel, shopping mall, etc.
It's mainly used to produce PVC / WPC wall panel, PVC window & door
profile, PVC ceiling tile, PVC skirting etc.
It is a kind of high efficiency equipment for plastic extrusion, it
is mainly composed by force feeder, soft plasticization screw and
barrel, high precision gearbox, exhaust system, it is features of
even mixing, better plasticization,stable working, high capacity,
and it is suitable for produce PVC products from mixed powder,
within different mold and other auxiliary equipments, it can
produce plastic pipe, profile, board, sheet, granules, etc.
Properties and advantages
This line features stable plasticity, high output, low sheering
force, long life service, and other advantages. The production line
consists of the control system, conical twin-screw extruder,
calibration unit, haul-off unit, cutter, film covering machine, and
stacked, the extruder is equipped with an advanced AC inverter,
imported temperature controller(RKC/OMRON). the calibration unit's
vacuum pump and haul-off unit's motors are famous brand products.
after a simple changing of the die and screw, it also can produce
the foam profiles.
Work flow and detailed information
| Feeder | • Screw loader feed material into extruder; | | Extruder | •World famous brand electrical component: Siemens, Schneider, ABB
etc; • High torque gearbox with adopts famour bearing:NSK/SKF etc;
• Siemens motor achieved global after service;
• Bimetallic screw and barrel;
• Intelligent PLC controlling system with human-friendly interface. | | Die head | • 3Cr13/3Cr17 material
• Complete set include extrusion die head, calibrator and cooling
tank • Adopt to single, co-extrusion, foam imitation marble profile | | Calibration table | • Include full set of vacuum and water pump
• Width: 240mm
• Length: 6000mm
• Independent operation panel for easy operation | | Haul off | • Upper/lower tracks driven separately and speed control by
inverter
• Fast change type pads for easy operation | | Cutter | • Lifting saw cutter with adopts double station dust collection
system
•Synchronous driving by air cylinder or servo motor control | | Stacker | • Stainless steel304 as touching material
• Discharge driving by air cylinder |
|
Equipment Usage Environment
Equipment usage environment
Power supply: AC380V, 50Hz, three-phase or customized.
Cooling Water hose/pipe: ≤20℃, ≥0.3Mpa, ～4 M3/hr
Ambient temperature: -10ºC-+42ºC
Relative humidity: 40%~90%
Compressed air: working pressure is 0.4 ~ 0.6MPa
Manpower:2 peoples
Main Machine Parts
| NO. | Specification | Quantity |
| 1 | Double-screw extruder with Automatic loading system | 1 set |
| 2 | Die head | 1 set |
| 3 | Calibrating and cooling device | 1 set |
| 4 | Haul-off machine | 1 set |
| 5 | Cutting machine | 1 set |
| 6 | Stacker | 1 set |
The services We Can Provide
1. We can provide factory building construction and renovation
plan, pipe laying plan in the factory building, circulating cooling
pool construction plan, etc.
2. Provide purchasing plans for raw materials, transformers, air
compressors, etc.
3. Provide specific formulas of relevant raw materials, excellent
raw material suppliers, raw material cost accounting, etc.
4. Provide install equipment, debug equipment, train employees, and
provide technical support all year round, etc.
5. We a nationwide plastics industry engineer alliance. If distance
permits, we can provide relevant talents to work in your company
all year round as technical support.
FAQ
1. Q: Where is your loading port?
A: Shanghai Port
2. Q: Payment term:
A: T/T, Western Union or cash, etc.
3. Q: Do you have other services for your products?
A: We have rich experience in manufacturing plastic machinery, so
we can manufacture various machines according to customers'
requirements.
4. Q: How do you quote for customers?
A: The price depends on the quality and performance, but customer
satisfaction is the first priority.
5. Q: How many engineers are there?
A: We have 10 professional engineers working and they all have
passports.
6. Q: What if the machine is started before delivery? Is it free or
do we need to pay?
A: Of course, we have to start the machine for you to check until
you are satisfied with our machine and it is free.
7. Q: What is your warranty terms
A: Warranty period: 12 months
Seller shall grant: services and spare parts, free-of-charge
service throughout the entire equipment during warranty period.
Long life service: the seller should provide long life service for
the sold goods, the buyer pay for needed spare parts after the
12months warranty terms.
8. Q: What is your overseas service?
A: We will provide high quality overseas service ,our technical
staff will be able to provide you with technical support, for you
personally to overseas assembly and test equipment.
