Flame Retardant Chemistry Lab Furniture FRP Test Table for
Laboratory
Quick Details
Material: FRP materials
Size: L*750/1500*850 mm
Type: Laboratory workbench furniture
General Use: Commercial Furniture
Place of Origin: Guangdong, China
Color: grey white
Frame: Floor Mounted Structure
Worktop: FRP board , Epoxy phenolic resin board, epoxy resin board
MOQ: 2 pcs
Loading Port: Guangzhou,shenzhen
Delivery Terms: EXW,FOB,CIF,CFR
Structure: FRP
Guarantee: 5 Years
Profesional Design: Our lab furniture can design and customize lab furniture with
you. you only supply to us your laout , and description of your
application. and we will give you designing drawing to you
Product requirements: the internal and external surface of the
product shall be bright, smooth and smooth, without falling off,
bubbling, indentation and surface scratch, pitting, crack and edge,
advanced technology, beautiful and durable.
※ tap requirements: tap must be formed at one time, without seam,
smooth inside and outside surface, prevent side leakage of solution
and so on.
The bearing capacity of the product is up to 400~500KG, and the
thickness of the material after molding is ≥4mm.
There is no additional layer inside the molding products, and the
inside and outside materials are the same.
The product density shall reach 1.809g/cm2 and meet the national
inspection standard (GB/T 1033.2-2008).
Thermal deformation temperature (1.8mpa) > 180℃, meet the
national (GB/T 1634.2-2004) inspection standards.
The horizontal combustion performance reaches HB level and meets
the national (GB/T 2408-2008) inspection standard.
The test report of the national testing department with CMA or CNAS
qualification meeting the above conditions shall be provided.
※ CNC equipment is molded with depth deviation ≤2mm, height
deviation ≤1mm, split seam ≤1.3mm;Drawer sag ≤4.2mm;Perpendicularity of adjacent side: diagonal of table, diagonal of
box body 1000mm≤1mm, 2000mm≤1mm, 3000mm≤2mm;Floor balance ≤0.4mm.Door and frame, door and door, door and drawer gap, interval 1-2mm;
Does FRP flame retardant anticorrosion test bench to meet national
environmental protection equipment testing institutions chemical
performance test: sulfuric acid (98%), hydrochloric acid, nitric
acid (37%) (65%), sodium hydroxide (40%), carbon tetrachloride,
acetic acid (99%), hydrogen peroxide (3%), sodium sulphide
saturated liquid, formaldehyde (37%), phenol, phosphoric acid
(85%), hydrofluoric acid (48%), and other 12 chemical testing, test
results is no obvious change.
Flame Retardant Chemistry Lab Furniture FRP Test Table for
LaboratoryFRP lab bench advantage:
1. The test bench is made of polymer composite sheet material
through high pressure thermosetting of machine and equipment.It has the following characteristics:
Waterproof and anti-condensation, high temperature resistance,
anti-scratch and wear resistance, acid and alkali resistance,
corrosion resistance, anti-aging, long service life (up to more
than 10 years), flame retardant, environmental protection, simple
disassembly (can be repeatedly installed and disassembled, will not
produce damage and deformation), flexible color matching and other
adva
2. Product requirements: the internal and external surface of the
product shall be bright, smooth and smooth, without falling off,
bubbling, indentation and surface scratch, pitting, crack and edge,
advanced technology, beautiful and durable.
3. tap requirements: tap must be formed at one time, without seam,
smooth inside and outside surface, prevent side leakage of solution
and so on.
4 .The bearing capacity of the product is up to 400~500KG, and the
thickness of the material after molding is ≥4mm.
There is no additional layer inside the molding products, and the
inside and outside materials are the same.
The product density shall reach 1.809g/cm2 and meet the national
inspection standard (GB/T 1033.2-2008).
Thermal deformation temperature (1.8mpa) > 180℃, meet the
national (GB/T 1634.2-2004) inspection standards.
The horizontal combustion performance reaches HB level and meets
the national (GB/T 2408-2008) inspection standard.
The test report of the national testing department with CMA or CNAS
qualification meeting the above conditions shall be provided.
5. CNC equipment is molded with depth deviation ≤2mm, height
deviation ≤1mm, split seam ≤1.3mm;Drawer sag ≤4.2mm;Perpendicularity of adjacent side: diagonal of table, diagonal of
box body 1000mm≤1mm, 2000mm≤1mm, 3000mm≤2mm;Floor balance ≤0.4mm.Door and frame, door and door, door and drawer gap, interval 1-2mm;
Does FRP flame retardant anticorrosion test bench to meet national
environmental protection equipment testing institutions chemical
performance test: sulfuric acid (98%), hydrochloric acid, nitric
acid (37%) (65%), sodium hydroxide (40%), carbon tetrachloride,
acetic acid (99%), hydrogen peroxide (3%), sodium sulphide
saturated liquid, formaldehyde (37%), phenol, phosphoric acid
(85%), hydrofluoric acid (48%), and other 12 chemical testing, test
results is no obvious change.
FRP lab bench SPECIFICATIONS:
| Product Name | Lab Workbench |
| Structure | Floor Mounted Full FRP Workbench Traditional design with roomy storage space |
| Custom-made | Dimension |
| Color |
| Worktop | 1)FRP or 16 mm/19mm/25mm thickness EPOXY RESIN, Black Color 2)304 STAINLESS STEEL cover with 25mm thickness MDF or Particle
board core 3)19mm thickness WILSONART CHEMSURF/ Wilsonart Physurf/ Protector 4)19mm thickness Formica Chemtop 5)WORK TOP: 20mm thickness of Laboratory Ceramics whose surface
highly resistant to chemicals and well-suited for laboratories
using very aggressive products. This is an extremely hard material
resistant to scratches and resistant to high temperatures. The
color: Black
|
| Cabinet | Worktops shall be supported by heavy above 500 KG
Frame work shall be available in two heights, 750mm for sitting
height and 900mm for standing height. Vertical member framework
shall be with CNC punched slots for shelves/hanging cabinets. The
total framework except for front and back shall be in one piece. |
| Handles | Integrated with door and drawer/Plastic/304 Stainless Steel |
| Reagent Shelf | FRP |
| Accessories |
| Faucet | Brass body with ceramic valve core coated with epoxy resin powder. |
| Sink | PP sink;ceramic sink; epoxy resin sink. |
| Socket | Electric sockets, electric circuit breakers and the telephone and
computer outlets are located on this electrical trunking made of
PVC and anchored to the shelf vertical supports |
| Drip cups | Drip cups can be made in different shapes and material depending on
their location and task. |
PHOTO:
