XL4015E 5A 75W Step Down Power Module DC DC Adjustable With Voltage Display

With power indicator

• with a voltmeter display and the voltmeter can be self-calibration. Using a more advanced voltage microprocessor, voltmeter
• error ± 0.05V, range 0 ~ 40V. (Note: To ensure the accuracy of the voltmeter, please ensure that the input voltage above 4.5V)
• Touch the button to switch the measurement input or output voltage, and the indicator shows which circuit voltage is being meas
• ured, and save the settings, even if the power is turned on again.
• The voltmeter can be turned off, when you do not need to touch the left button can be easily achieved.
• With terminal blocks, no soldering iron can also be used easily, and retain the wire connection point.
• Input voltage 4.0 ~ 38V. (The input voltage must be higher than the output voltage 1.5v above)
• Adjustable
• output voltage range 1.25V ~ 36V continuously adjustable. (The input voltage must be 1.5V higher than the output
• voltage)
• Output current up to 5A, it is recommended to use within 4.5A.
• Output power up to 75W, more than 50W Please strengthen the chip cooling. (That is, must add a small radiator)
• high conversion efficiency, up to 96% (efficiency and input, output voltage, current, pressure related)
• Operating frequency: 180KHZ
• Load regulation rate S (I) ≤ 0.8%, voltage regulation rate S (u) ≤ 0.8%
• with overheating protection and short circuit protection (but the short circuit in case of accident, try not to short circuit)
• Board size: 6.64 * 3.89CM
• Input voltage:4.0 ~ 38V
• output voltage range:1.25V ~ 36V
• Output current:up to 5A, it is recommended to use within 4.5A.
• Operating frequency:180KHZ​