Transmission Line Stringing Tools P-MT-8100 Telephone Test Set
Description
The Fluke Networks TS30 telephone test set, available with various
line cord connectors to suit specific applications, detects dial
tone and polarity; places and receives calls; monitors lines
without disrupting service; and retains one 23-digit redial number
for about eight minutes. It provides tone or pulse operation. A
pair of LEDs on the front of the unit indicates line polarity when
off hook. The test set passes a 20-foot (6 m) drop test and is
Ingress Protection certified IP54 for protection against dust and
splashed water. The keypad has 12 standard dialing keys including
star and pound, and function keys to mute, check polarity, redial a
number, and pause for accessing a second dial tone when dialing
through a PBX (private branch exchange). A two-position switch
allows selection of monitor mode for high-impedance monitoring
without disrupting service, and talk mode for dialing and talking.
The test set is made of high-impact polycarbonate that provides
excellent insulating properties. Its contoured hand grip rests on
the shoulder to enable hands-free operation. A spring-loaded belt
clip at the base of the unit provides a secure hold on belt loops
and D-rings. Additionally includes various environmental operating
conditions. Telephone test sets, also called butt sets, are used by
telecom technicians to troubleshoot and maintain copper-wire
voice-subscriber lines.
| Specifications | - Line Current range - 15 to 120 mA
- DC resistance ( talk mode) - 270 (typically) out 20 mA
- Monitor mode impedance - 120 K , 300 - 3400 KHZ
- Rotary dial pulse rate - 10 + or - 1 pulse per second
- DTMF ( dual-tone multi frequency) + or - 1.5% maximum
- Voltage protection - 250 VRMS across the test leads
- Memory Capacity - One 23 digit redial # shared line power
- Dimensions - 25.5 X 7.2 X 8.5CM/10 X 2.83 X 3.34"
|
High impedance DataSafe operation in Monitor mode
DropSafe reliability passes 20 foot drop test
RainSafe protection in severe weather conditions
Mute switch
Last number redial
Audible ringer for callbacks
High impedance monitor mode
Automatic regulation of speech levels
Tone and pulse operation
Last number redial in tone and pulse modes
Hook flash button
Fully functional with either line polarity
Audible electronic ringer for call backs
High current and over voltage protection
High impact polycarbonate case
Field replaceable spring-loaded belt clip
Hearing aid compatible receiver
Transmitter Mute switch
Talk and Monitor modes
Ergonomic design
Lightweight unit is easily transported
