Zipper Shipping Boxes Machine / Maximum paper size1300mm×1050mm /
Air compressor min. 6 bar
| product description |
Semi-automatic press model folder&gluer speicail to meet middle
and small orders, small CBM, easy operation, widely use range, it
is suit for normal box, special shape color box. Add automatic
gluing device also can produce hook bottom box and earth cover
carton, save glue, labour, maxmium run speed 60m/min, the effective
is 3-4times than normal mahcine; gluing firmly, trimly and don't
over glue,with double head sander remove UV or film. Improve
adhensive.
|
| Model | HM1300 | |
| material | ≥300g/m²cartons | |
| Minimum paper size | 250mm×250mm | |
| Maximum paper size | 1300mm×1050mm | |
| The highest speed | 60m/min-100m/min |
Advantages:
This machine can be added with a shell, which is not only
beautiful, but also has a protective effect.As shown below .
E-commerce special zipper carton third generation glue process
Compared with the first generation of double-sided glue, the second
generation of foam glue two adhesive materials, the third
generation of technology advantages are very obvious.
1, 10000 meters long endurance, production efficiency increased by
35%.
2, hot melt adhesive material cost is 40% of double-sided adhesive.
3, environmental protection degradation (double-sided adhesive can
not be completely degraded).
List of vulnerable parts:
| model | picture | quantity | unit | Notes |
| Tooth blade (15 teeth) | | 4 | slice | |
| Press wheel + wrap adhesive | | 4 | piece | |
| The flat cutter | | 2 | piece | |
| The belt | | 1 | piece | |
Function and trait:
1. Small size ,Small footprint, easy to operate without experience,
ideal for small batch production and variety of replacement.
2. Wide scope, normal cardboard boxes, abnormal single-sheet
molding adhesive, It will make lock bottom boxes,lid and tray boxes
after installation of automatic spray adhesive devices.
3. Save glue,it is equivalent to 1/3 of using manual gluing.
4. Save on labor,the Max. speed is 56 m / s, High efficiency is 3-4
times of manual operation.
5. Bonding firm and tidy, glue not overflow , patent-double headed
sander can be used to remove the UV film, plastic film or coating
layer, etc. To improve the adhesive force,and solve the problem of
carton easy to onen nlastic in some seasons.
6. Two sets of gluing devices: gluing for bottom glue, gluing for
side glue. All standard glue units shall apply thread glue. Space
adjustment is made by means of toothed bars.
7. PLC control system, touch screen, easy to operate. Output
quantity/speed/count, etc., can be set by the system. Maintenance
is carried out by remote diagnosis (including remote control
system), and the tablet pressing speed is controlled by
photoelectric system (the tablet pressing speed is automatically
corresponding to the feeding speed). Count by photoelectric sensor
and electromagnet kick.
8. The press adopts pneumatic design. The upper belt can work
alone. The machine also uses sponge belt compression, so that the
output is kept in the best state. The horizontal receiving table
after pressing helps to collect cartons quickly.
9. Select a pre-folded section or a modified section as required.
Pre-folded parts, folding 1 180°, folding 3 90°, folding 2 and 4
box 180°. The correction section helps the paper move and fold in
the correct line.
10. In order to solve the problem of asymmetric folding, a separate
governor is proposed for corrugated products of folded section,
which can independently control the speed of each side.
11. Spare parts: Siemens or WNM motor, Schneider Electric /PLC/
frequency converter (frequency converter), NITTA belt from Japan,
FYH/HYF/NSK bearing, German synchronous belt. These will make the operation faster and more
stable. In addition to ordinary cardboard boxes, E/B flutes can
also be made.
Safety performance:
A: Electrical safety meets the national standard (CE
certification).
B: The exposed transmission parts are covered and marked; There is
an emergency stop button on the remote control, front end of
feeding, rear end of receiving and middle console.
C: In line with the national requirements for energy conservation
and emission reduction, the motor energy efficiency is level 2.
D: Maintenance is convenient and quick. Butter is added to the glue
machine head and main drive shaft with a butter nozzle.
