Permeable EPDM Rubber Runway A poured-in-place Track Surface
A poured-in-place Track Surface Details:
Polytan synthetic athletics track surfacing systems are complex structures made up of different layers depending on the
intended use.
The synthetic surface may be water-permeable or waterproof,
pour-coated or granulated, and solid or multi-layer, over an
asphalt base.
Unlike running on asphalt or sidewalks, running on synthetic tracks is significantly more forgiving on your
muscles and joints.
People with bad knees, shins, calves, etc. should avoid hard
running surfaces and stick to synthetic tracks or soft dirt.
A poured-in-place track surface that is impermeable and installed
in a multi-layered application.
The base layers consist of two-component polyurethane and recycled
rubber. The top layer is a flow-applied layer of two-component
polyurethane with EPDM granules
A basemat running track system made of high-grade recycled rubber
and coated with a moisture-cured polyurethane binder.
The basemat is crowned with layers of EPDM rubber and sealed using
Single Cast Sealer (SCS), which creates an exceptionally strong
bond and prevents delamination.
Comprised of a base layer of polyurethane bound rubber granules and
topped with a spray-applied coat of one or two-component
polyurethane and EPDM granules.
A poured-in-place Track Surface Project:
