Glue Dispenser To Make Key Chain 3d Pvc Logo Label Soft Rubber
Patch Making Machine With Quality Assurance
If the liquid has additives or needs to be combined with vacuum
defoaming, an electric stirrer should be installed in the material
bucket.
When the operability of the liquid is affected by the temperature
change, a temperature control system should be installed in the
barrel or pipeline.
If the liquid contains quartz powder or other abrasive powder
additives, it is recommended to use piston-type volumetric metering
products.
If there are additives in the liquid and there is serious
precipitation, the gear metering type cannot be used.
The mixing method of the two liquids depends on the proportion and
viscosity difference to decide whether to use static or dynamic
mixing.
When the viscosity difference between the two liquids A and B is
too large or the ratio is above 5:1, a dynamic mixer is required.
For use with automation equipment, please install a high and low
liquid level detector.
If the liquid crystallizes, in addition to the rubber storage tank,
temperature control must also be installed in the feeding pipeline.
When a large amount of glue is used in daily work, a feeding pump
can be used to replace the glue storage bucket.
If there are no air bubbles in the product during the potting
process, a vacuum infusion system is required.
