Flat Press Plate Vulcanizing Machinery Vulcanized Rubber Pressing
Machine With 100% Safety
Fulund has a long history since its establishment in 1999. Due to
the needs of development, the original brand (TYL) expanded the new
brand Fulund in 2022 . Fulund has customers all over the world,such
as international brands shoe manufacturer.
Fulund mainly produces: Hot label machine, foam cutting machine,
insole hot stamping machine, shoe tongue transfer hot stamping
machine, insole heat transfer machine, insole cutting and transfer
integrated machine, insole printing machine, silk screen printing
machine, embossing machine, soft rubber equipment , vacuum
vulcanizing machine, silicone labeling machine, glue dispensing
machine, etc.
Fulund vulcanizer performance introduction
1. PLC, HMI control, can realize manual and automatic control.
Automatic control can realize functions such as mold clamping,
exhaust, temperature control, vulcanization timing, alarm, mold
opening and unloading; the touch screen displays the temperature of
each heating area of the hot plate in real time.
2. The hydraulic cylinder is made of ZG270-500 material, and the
plunger is made of chilled hard alloy cast iron with dense texture,
which is finely ground after casting; the sealing form of the
hydraulic cylinder is a YX type sealing ring.
3. Hydraulic automatic top iron is used on the pot side of the hot
plate. Under the action of four oil cylinders, the horns on both
sides of the hot plate advance and retreat at the same time; the
two ends of the hot plate are provided with anti-pillar iron
overlapping devices.
4. Each heating area of the hot plate is equipped with a set of
temperature-adjusting valve groups. Under the control of PLC, the
temperature of each heating area of the hot plate is guaranteed
to be uniform.
5. Hydraulic system: Using the hydraulic station of well-known
brands at home and abroad, under the control of PLC, it can realize
automatic: mold clamping, exhaust, mold opening and unloading.
6. Mechanical synchronous balance mechanism: There is a synchronous
shaft running through the unit under the platform, and the two ends
of the shaft are provided with racks and pinions to ensure the
horizontal lifting of the platform.
7. Clamping guide device: There are mold clamping guides on both
sides of the lower bed, the frame plate and the platform are
installed with a guide seat, the guide seat is processed with an
inclined plane, and the distance of the inclined plane can be
adjusted by the top wire.
8. Mould opening assist mechanism: When the mould is opened, the
four oil cylinders located under the platform act to pull the
platform down forcibly to prevent the sticking pan from being
unable to open the mould.
Introduction to the structure of the vulcanizer:
1. Structural stability: a special four-column structure is
adopted, the upper seat is reinforced with medium carbon steel, and
the upright column is thickened and hardened to ensure structural
stability and accuracy.
2. System: The high plane pressure equalization correction is
adopted, and the pressure (18mpa) strengthens the nut leveling
device, which can increase the parallelism of the upper and lower
heating plates to 0.05mm.
3. Temperature control system: Adjustable from room temperature to
350°C, using intelligent temperature control to control the
temperature fluctuation range within ±2°C.
4. Operating system: PLC combined with touch screen, whether
debugging or production, can be controlled directly and simply.
5. Operating system: The optimally designed oil circuit and
high-quality oil circuit accessories ensure the smooth operation of
the entire oil circuit system from the principle and accessories.
6. Energy-saving system: The heating plate adopts the deep hole
processing technology, which is closely matched with the heating
pipe to reduce the heat loss during the heat transfer process.
7. The intelligent system can automatically push out the mold,
thereby reducing the labor time of the staff, increasing
efficiency, high output and saving time.
Scope of application:
Children's toys, baby products, kitchen supplies, clothing labels,
equipment seals, etc.
