18w+18w Tunable/ Dimmable CSP Led Chip 110-120lm/w for Hotel Retail
Lighting CE ROHS LM-80
Product Description
Product Information |
Model | XC-18*18/14 |
Power | 18W+18W |
Voltage | 36-38V |
Color Temperature | 2700-6000K |
Life Span | 50000 hours |
Chip Brand | US Bridgelux |
CRI | >90 |
Luminous Efficacy
| 110-120LM/W |
Specification
- LEDs Type: XC-18*18/14 Tunable COB LED CHIP
- Wattage: 18W+18W
- Input Voltage: 36-38V
- Current: 450mA +600mA
- Lumens: 110-120lm/W
- CRI: ＞90
- Color temperature: 2700K+6000K
- Operation temperature: -30℃-+75℃
- Storage temperature: -30℃-+75℃
- Case Temperature: 85℃
- Junction Temperature: 125℃
- Soldering temperature: 350℃± 10℃ For 5 Seconds
- ESD Sensivity: 2000V HBM
- Continuous Operation Test: Tc=85℃ IF=450mA 1000H
- Low/High Temperature Storage Test: -40℃/30min~ +100℃/30min 100
Cycles
- Low Temperature Storage Test: Ta=-40℃ 1000H
Electro Optical Characteristics
Product Code
| Nominal CCT
| CRI(Ra) | Luminous Flux(lm) | Efficacy ( lm/W ) | Forward Current (mA) | Voltage (V) |
| | Ra | R9 | | | | |
| | Min. | Min. | Min. | Typ. | Typ. | | Min. | Typ. | Max. |
| XCT1814-M1207-A27/6090-E31 | 2700K | 90 | 50 | 2550 | 2600 | 115-120 | 600 | 36 | 36.5 | 37 |
| 6000K | 90 | 50 | 2200 | 2250 | 135-140 | 450 | 36 | 36.5 | 37 |
Absolute Maximum Ratings
| Parameter | Symbol | Rating |
| Forward Current | IF | 1295mA |
| Reverse Current | IR | 1mA |
| Operating Temperature | TOPR | -30℃ To +75℃ |
| Storage Temperature | Tst | -30℃ To +75℃ |
| Case Temperature | Tc | 85℃ |
| Junction Temperature | TJ | 125℃ |
| Soldering Temperature | TSOL | 350℃± 10℃ For 5 Seconds |
| ESD Sensitivity | ESD | 2000V HBM |
Application
User Manuel
1. Storage
To avoid moisture, we recommend storage conditions for the unopened
LED +5 ~ +30℃
rela-tive humidity <60%. LED should be used within 168 Hrs. of
opening the package. Please
make sure to dehumidify and vacuum pack the remaining/ unused LED.
Dehumidifying condition:
+120℃±5℃ of 4Hrs. Effective age for the sealed led is one year.
2. Anti-static measures
Please take adequate measures to prevent electrostatic generation,
such as wearing
electrostatic ring or anti-static fingerstall etc; any relative
products like plant
equipment, machinery, carrier and transpor-tation units shall be
connected to discharging
unit/ ground. The ESD sensitivity of this product is >
1000V(HBM), after assembly the final
lamp, please make sure to discharge Static Electricity by proper
ESD equipment.
3.Temperature control
Recommended temperature conditions for enhanced product life: Be
sure to TS point (negative
pads) controlled below 85℃, COB recommendation colloid surface
temperature control ≤150℃.
4. Others
Should the product be used outdoors, be sure to IP (protection
class) ≥65
Product is not suitable to use in following conditions
-Direct or indirect wet / damp conditions, such as rain, etc.;
-In contact with sea water and erosive materials
-Exposed to corrosive gases (e.g., Cl2, H2S, NH3, SOx, NOx, etc.);
-Exposed to dust, liquids or oils.
